You Yourself said the toner was bad your a joke
Type: Posts; User: Wild Bill
You Yourself said the toner was bad your a joke
Replace defective toner
You can Try Metro Fuser or Liberty parts Team but I think those are too old. I used to sell mine on ebay
Its working now after replacing the HVPS But i need to test it don't want to take it out there after this its a parts machine.
Error codes weren't much help, Thank you guys
Thank you PrinterDude, Yes I have already done that no effect, and now I will try HVPS
Thanks Murv I appreciate your help
I believe that Secure File erase is for a MFP an HDD, This has a little eMMc Board and I did use "Format Disk". If I'm wrong I sure can't find that. Yes I did...
Stuck on Initializing
Here is what I have done so far...
Replaced in this order: Installed Latest FW, Formatter with eMMc, DC Controller, Toner Cartridge, Fuser, LV Power supply, Ribbon...
Just to add, possibly build up of toner on fuser guide
Yes that's the whole assembly, if you need a gear from this assembly then you have to buy the whole assy.
Try ebay
https://www.copytechnet.com/forums/hp/124670-m527-duplex-jams-post583766.html?124670=#post583766
Here's a thread on something similar. I don't think DC Controller, This tech thought it was the...
13.d3.a2 Duplex Jam Does it do this when you are running single sided?
Try the ITB
My thought would be ITB
When you print a config page what happens?
Pretty sure there's a little fuse that resets it when you install a new fuser.
"How to access the tray 3 drive train - Is it like the 5si / 8100 that requires removal of the complete module?"
Yes
I remember there were issues with the registration assembly so I would replace that first.
Yes that's it
HP M9605 alerts toners
Your title through me off, but HP has a tool google it or you can buy aftermarket software
you beat me lance haha!!
Try the Pre-Boot method,
Turn the Power on. Press the Stop button when the Ready, Data and Attention LEDs illuminate solid. I think...
Good luck
He gave you the answer, just cause you didnt like the answer you act like a jerk? What's your problem?
Try a different HDD Possibly bad? Good Luck!!
If it's a Canon part don't they stamp the P/N's on the part? I'm not a canon tech but HP did that.