It's Monday :D but as already been said, clean the rest of the optics, test with manual dark exposure, adjust exposure in simulation if needed. Auto exposure may be hiding a problem that shows with...
Type: Posts; User: oldrn
It's Monday :D but as already been said, clean the rest of the optics, test with manual dark exposure, adjust exposure in simulation if needed. Auto exposure may be hiding a problem that shows with...
Here is an article in ENX Magazine that gives some background. ENX Magazine Business Profile . We have not sold them but while doing research, our purchaser said the profit margin on supplies was not...
Did you try looking at the drum after interrupting the print cycle to see if there is any toner being transferred to the drum?
I may not be understanding how it is jamming. The shreddings should fall directly into the bin or bag from the cutter? I did have a problem with static electricity where the shreddings wanted to...
SAM4S - formerly Samsung - has a wide range of machines http://www.crs-usa.com/ . Carolina Wholesale sells them also.
Can you upload a sample copy? Is there a defined edge where the copied & blank meet? 8 1/2 x 14 are okay?
There is a lens that tends to come loose in the laser unit. That lens hangs from the "top" of the LSU like a bat which allows it to just fall out of place when the original glue lets go. Take some...
Look at some of the threads for the AR-M455 doing similar things such as this one: http://www.copytechnet.com/forums/sharp/85280-weird-arm455-problem.html?highlight=print+job Since the MX-M350...
I agree with this. I have had more than one MX-M260 that has dumped dv that were not far off from level but still made a huge mess of things. The 257 has a different dv box but is still similar....
There may be a better way to post this but this may be the bulletin walterman was referring to
http://www.copytechnet.com/forums/attachments/sharp/6457d1286294600-ar-m257-el-error-dce-797-pdf
I plead guilty to not reading your original post carefully. I fuss & fume when others do that, now look what happened. My Tuesday morning brain completely missed the sentence that said you had...
Given the issue described here, this may not help but I would suggest swapping out the main charger assembly. I would think that there would be other complaints if there were main charger problems...
Praying that you will find peace in times like these.
Being oldrn, I don't always remember things but I do believe they came in an original shipping container. NuWorld will occasionally call with similar offers. I still have a recent flyer on my desk...
NuWorld keeps finding new old Sharps somewhere. We bought some new AR-M237s less than 3 years ago from them.
I would suggest changing the default cassette to the bottom cassette rather than the top cassette - assuming it has 2 or more cassettes. The paper feed unit for the top cassette is not as easy to...
I had this problem when using generic staples.
SPLC driver in that package = GDI driver? I don't do enough of these to say that with an exclamation point, maybe someone here will confirm.
Even more fun when it is a generic toner going in a color machine. Four imaging units and a transfer belt later, maybe it wasn't such a good idea?
You say that the drum is ok. Is it a new drum, fairly new or it just looks good?
Is the drum being cleaned by the cleaning blade?
Are they using Sharp toner or whatever they can find?
Are you using Sharp toner or a generic?
You haven't change the harness yet? I was able to make a bad harness work until I had a replacement by swapping ends of the cable. The end that was broken made contact when it was flattened out. The...
Is this machine in an environment where the clutches might be dirty? Even if not, a bad clutch can put too much force on the clutch sleeve. When the solenoid tries to pull in, it doesn't have enough...
I had seen these advertised on e-bay. I asked the seller if they would help with the registration but did not get a reply. Yes, I know it was e-bay but it looked like the seller was a dealer or...
Somebody with better memory than mine, it seems like some of the older Sharp's transfer & separation coronas would glow a faint blue when in simulation mode if the lights were dimmed enough. I don't...