Search:

Type: Posts; User: TonerMunkeh

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Re: So I messed up... What are my options? MP C3002

    The grounded paper transfer roller pulls the toner off the ITB onto the paper as it passes. On the '03 series a worn PTR can give all sorts of copy quality issues.
  2. Re: So I messed up... What are my options? MP C3002

    That looks like it could be the PTR assembly itself that's broken or one of the large tension springs inside it is out of position.
  3. Replies
    6
    Views
    1,479

    Re: MP 3055 jam in C area

    Check input mode and see what sensor is being triggered.
  4. Replies
    5
    Views
    1,510

    Re: Ricoh pro c5100 error sc 551-00

    Sensor 4: Pressure Roller Center Disconnection

    0 degrees or lower was detected for (t1) seconds consecutively.

    Number of times: 10 or more
    D135 (Japan):75 (seconds)
    D136 (Japan)/D135 (NA): 75...
  5. [Error Code] Re: Ricoh ProC9200 - ACD unit malfuntion - Error Code SC693-01

    SC693-01
    B
    Auto Color Diagnosis Unit: Ready notification timeoutWhen the engine can not receive Ready notification from Auto Color Diagnosis Unit.
    • VPU defective
    • Communication error between...
  6. Replies
    17
    Views
    2,244

    Re: Ricoh IMC6000

    The IMC Metis is designed to have it's parts replaced as lumps. Complete PCDU's, fuser, ITB etc. Run it with ORIGINAL toner and don't put anything stupid through it, you will have a very reliable box.
  7. Replies
    3
    Views
    683

    Re: Desktop MFP recomendation with RADF

    IMC300? Perfect for scanning with the SPDF.
  8. Replies
    3
    Views
    507

    [CQ] Re: Blue background on SPC250sf

    This model is particularly bad for the glue attaching the ADF slit glass to the scanner frame part, causing all sorts of ridiculous copy quality issues.
  9. Replies
    5
    Views
    591

    [Error Code] Re: 8320 how do I get into the SP mode?

    It is the same procedure on the 8320 as an MPC4504 etc. What parts counters are you after clearing? Some of them won't let you unless you change the part first.
  10. Replies
    12
    Views
    1,163

    Re: Ricoh MP 301 semi blank page

    Do you have the old PCU to hand to try?
  11. Replies
    29
    Views
    3,779

    Re: Yellow print on RICOH MPC 6503

    There's been a problem with the charge bias boards on this model of Charis, maybe that's your next step.
  12. Re: Ricoh aficio mpc2500 compatible fuser unit

    553 on the older Athena / Diana series machines is normally "the fuser is knackered, bin it".
  13. Thread: Pro 8320s

    by TonerMunkeh
    Replies
    5
    Views
    1,476

    Re: Pro 8320s

    Does it do this when it switches trays? Duplex may be switched off on the tray it switches to.
  14. Re: SMB scan on older copier MPC3300 / Savin C3333

    RICOH Firmware Update Tool Downloads | Ricoh Global
  15. Replies
    11
    Views
    2,370

    Re: IM 430F Opinions?

    They are an alright box only if the customer thoroughly trained on the replacement of toner, the little wheel on the front of the tray and don't try and rag the PCDU out of it if it's sticking. Those...
  16. Re: A yellow band on solid occurs on cross feed(PRO c5200&5300)

    What sort of mileage do the dev units themselves have on them?
  17. Replies
    14
    Views
    4,713

    Re: Mp c3004 paper jam code 019

    A worn fusing sleeve or pressure roller is usually the cause of jams 18 or 19.
  18. Replies
    10
    Views
    2,680

    Re: Ricoh MP 5055 poor density

    I've had a lot of problems with the SP8400 covering it's ID sensor in toner. This causes depletion and spurious add toner conditions.
  19. Replies
    4
    Views
    1,309

    [Jamming] Re: Ricoh Aficio MP 1600 paper jam message

    Turn the registration roller backwards, you may see a piece of paper appear.
  20. Re: Ricoh 4504 ex SC-995-01 After replacing board

    Are the engine numbers on the serial number stickers the same?
  21. Replies
    7
    Views
    1,328

    Re: Ricoh MPC2800 cyan overtoner

    https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=d0239660&_sacat=0&LH_TitleDesc=0&_odkw=d0239640&_osacat=0
  22. Re: IMC4510 type m12 optional counter interface

    I've also just had a look in the service manual too. How bizarre. I shall ask some questions.
  23. Re: IMC4510 type m12 optional counter interface

    There is something that looks like a spare connector where I have highlighted, it looks at a funny angle to the others.

    60578
  24. Re: IMC4510 type m12 optional counter interface

    Does that mean there isn't on the 10's? I did see an IMC3000 a couple of weeks ago, the connector was further up on the left side of the controller box to the left of the IPU, I wonder if it's in the...
  25. Re: IMC4510 type m12 optional counter interface

    On the 04's / IMC's there is a spare 13-pin connecctor loitering in the middle of that loom.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4