Search:

I do not have the manual, I am providing, what is this error code?

Thanks

Worked...I restored all nvm manually...thank's...

Thanks...I I'll try it on monday....

Thanks. I did it, and I inputed again the serial number on the IOT, SYS1 and SYS2, and now the following message appears on the UI"cosumables were not seated properly or need replace", I replaced all...

I have a DC250 with error code 124-341. I inicialized de Sys, but the error code persist.....Any idea?

Hi.
f need a drv for win seven 64bit for ColorPass Z40. Someone to help me have it?

040.33.53050

Hi guys...
How I reset the admin password? The default password was changed.(1111)

Thanks, I'll try it on monday.

Hi, sure for the time, but today I come back to machine.....I replaced thu drum unit, the pcb's, the potencial drum sensor, DC controller, hvps, charge corona, but the code persist. There are other...

Really...and what can I do to solve 061-009?

:confused::confused::confused::confused::confused: Diferent problem....

Hi guys. I cleaned the patch sensor, just it. I'm waiting the new patch sensor to replace it. Is there anything I can do until the patch sensor is not enough?

Hi Guys
I have a ImagePress C1 with this error code 061-009. I replaced the drum, 4 developing and 1 developing assembly. I checked and changed with other machine, the hv pcb assembly and I checked...

11630
This is the sample, and this copy was made on single color (black), if I send a print, the problem persist, and if I change the single color, (cyan, magenta), the prblem is same.

Hi guys
I have an IRC5185 with Blurry printer. This problem occur with copier and printe. I replaced the transfer belt, the drum, I cleaned the tranfer belt unit, and the machine interior, any ideas?

On the auto gradation, the scanner works normally

Yes, I'm trying calibrate the Fiery, using the Kodak Grey Scale, and when I put the printed page on the glass, with the kodak grey scale, the scan didn't move to did the scan, and the machine passed...

Hi guys

I can't calibrate the image pass of IRC5185. I printed the page, and I put on the scanner, but the scanner didn't work. I reinstalled de system software, but didn't resolved, I checked the...

Hi Teckat and Van Steal, excuse me the delay in responding, but the problem is solved, had a piece of paper in F/V sensor. Thanks, and once again, excuse me the delay.

Hi guys, I have a imagepress C1, with this error code. I consulted the manual, but I'm lost rsrsrs. What can I do?
What is the on edge of the sus plate?

Ok, if I replace the NVM by someone from another region, I change this values? 700-166 and 700-165? Do you understand me?

I tried change it, but didn't resolv. I tried to change the nvm 616-094, but I didn't access too. It's a information on gsn " incompatible toner cartridge", and it say " Enter Diagnostics on the UI (...

Thanks, I'll try.

Because I'm triyng to change the machine region. I changed the 700-165 to Brazil, but I need to change the 700-166 too, but this position is protect.