Just go to gsn lock posts, there you will find what you need.
Type: Posts; User: msoundpr
Just go to gsn lock posts, there you will find what you need.
Just go to GSN lock posts, there you will find what you need
Hi, Do not use DC5000 developer on a DC260, the DC5000 use toner with oil, the fusing of the DC5000 is base on a oil system, the DC240,42, 250, 252, 260, family is the same.
Hi,
Just go back to Tech Forums/copier tech diccussion/xerox/GSN Lock Thread, There you can read and have all the inf.
Hi, The connector on the board is not a RJ45 only have 6 pin.
Thank, The procedure tel me to use a communication cable with RJ11 one side and serial on the other side any idea how is the configuration of the cable.
Miguel
Thanks, The proble is that in the only way that you can reload the SW is using the USB. Turn on the machine a USB connected the machine will boot from the USB. The machine will check the HD and it...
Hi, I have a 7556 that will reboot, with code 6 HD fail, wend I connect the HD SATA to my laptop it show 15 partition and they are in unknow format. Any Idea. Xerox want $350.00 for 160 GB HD.
Hi, just replace the CCM PWV Batery you can order from Allied Electronics part # M4T28-BR12SH1$5.00 .
Hi, check this,
initializing the Sys-USER and then the Sys-SYSTEM via UI Diagnostics.
Please note that NVM location 790-402 was always at a value of 5.
At the end you will need to reload...
Hi Here is some inf. and procedure.
Miguel
Hi, the other thing that I will do is a panic stop, print some document and wend you have one on the output tray just open the front door and look at the print before the fuser. Is the defect is on...
I agree, I will look at the fuser, wend you have a problem with the optic the effect will be the same on all print.
MR
Thanks,
msoundpr@gmail.com
Hi, I am looking for a DC700 edoc for use with pws.
Thanks