62039
Type: Posts; User: ctuinstra
Had this same thing happen the other day. Swapped fusers and it worked great, but still wanted to figure out what was wrong with the first fuser. Ends up the pins on the fuser connector are...
They will not.
It's included in ricohrice's post above.
For future searching by other members, the specific message is "Code Signing Error". I believe we have the same issue and may have a DSK on it.
I've had this same issue for some time now. Makes this forum almost worthless trying to see if there is an answer out there. And, there is no real answer to this issue apparently.
Probably not so much helping with slow printing. But it will cut down on useless traffic. It's used to communicate "status" of the device which all too often is incorrect. It just gets in the...
Short answer, yes! You will need to open the XML file and strip out all of the other information but just the password and it tags. Have to understand XML in order to do it correctly, you can...
I've seen things like the a couple of times. It may be their IT is running vulnerability scans of their network and hitting the device. It looks like it trying to hit port 9200. Port 9100 is the...
And there we are, at the end and yet again, no solution.
I've done the same thing and thought it was good. It wasn't until I tried one of the other colors and notice a very audible difference in it and then swapped the two and the problem moved. Try the...
This is what I have so far.
MX-C507F & MX-C407F same as the Lexmark XC4150, XC4140
MX-C607P same as the Lexmark C6160
MX-C507P same as the Lexmark C4150
MX-C407P
MX-B707F
MX-B557P/B707P...
Had the waste toner been emptied once before and the flag reset? I've have seen many times where the follower is not straddling the rib on the gear. This will not allow the flag to push all the...
Never mind. It's the HDD. We have a couple of cases logged internally for this issue.
We have the same issue on a 4054. Any resolution?
Well, come to find out everything was working fine. The tech didn't understand how to batch print on the older models. You have to select "All Users" in order for it to batch print files. The...
We have a MX-M950 that is used extensively with Document Filing. Recently the customer could no longer select the jobs from their folder to print them. The button is there, just doesn't do...
There are machines that do not come standard with a HDD, those are especially prone to this issue. Adding the HDD option did solve our issue along with using a quality card.
The firmware dip...
Changing that changes the speed for ALL faxes, not just the one destination. Think about it, you are changing a system setting not a address book setting.
I could go on and on about VOIP, but...
We have over 200 company vehicles. About 100 of them are for service. Every service and field IT technician get a vehicle plus 500 miles a month for personal usage, managers get 1500 miles. As a...
I'm sure this has been discussed many times before, but I see far too many threads asking for help, getting tons of help, and then never closing out the issue with the fix! Wow, that really chaps...
You didn't happen to mention the type of port used for printing (LPR versus Raw, if Standard TCP/IP Printing). Hopefully they were not trying to use WSD. WSD is the biggest piece of junk! We...
In the machines that I am familiar with, the chip is used to identify the toner container to the machine. It has an identification, or serial number if you will, that when it's first put in the...
Here is the final on this. The last thing I did to the machine while in the shop was to replace the TC board again (even though the first one was for this same issue), replaced the PTC again (and...
I have been doing the cloning of SD cards for some time now. I have files for all of the models affected. I've been doing the SD card, CF cards, and the mSata, all with success. However I have...