I do not have a link and the word file is 1,5MB and I cannot put it here when it is above 1MB - send mail to copytecserviceafdeling@gmail.com and I will mail file to you
Type: Posts; User: knarfdnul
I do not have a link and the word file is 1,5MB and I cannot put it here when it is above 1MB - send mail to copytecserviceafdeling@gmail.com and I will mail file to you
There is a new bulletin for this - a spring in another form in the function, that turns the toner bottles.
Pressure roller gear new part - is able to rotate within on start and stop
You can order the complete transfer roller unit including the transfer roller so you save a lot of time moving parts. It is almost the same Price if you order it on the newest part number.
The thermostats in front of the fusing belt are unstable/old - we changed them and fixed the problem.
tjvincent thank you for your answer - I will try this - we have not seen this error before even though we have sold some from new. Ricoh have not heard of this in Denmark and Myricoh has no answers...
I know the PB3110 i special compared to older LCITs, but many parts are the same - I have just tried with these parts for test since the error was allready there with the original parts.
I have cleared that sensor. I can not find the sensor info in 5803 in the servicemanual so I can test it but i assume it works it stops correctly with a low pile of paper.
Thank you for your reply. The gear under left is ok. When the gear is bad it normally will not finish move from left to right which is ok in this machine.
Tray move left to right and back ok with Little paper. Full paper also ok to right tray - problem left does not move arm all the way back to the left. Tried changing the following parts from MPC4000...
Have you opened the front while feeding toner? I have once had a bad toner motor - otherwise RTB on toner feed coil and.
We changed thermopiles on the -02 models for this error - see below:
SC551-01 A Fusing Edge Thermopile Disconnection
Below -50 degrees C (or below CB) is detected for (t11) seconds
...
I can also be the toner bottle motor - I had one 305 where I changed the supply system for the toner, but saw that the bottle wasnt turning! Also changed the motor for the bottle.....
I had 2 new tray 2 units with no feed problem - the metal plate was not pushing enough on the rollers - bent it at Little and then it was ok.
Sometimes the clutches in the new tonerpumps need contact cleaner to Work - had several op these error on new pumps.
I allready changed thermistor, thermotats and bracket with the new parts. The error keep coming back. Today I cleaned the end thermistor and strippers for toner. The end thermistor bracket lowered a...
Hi Polarbear. I have taken all changed parts with me. Will put Them in maschine at workshop for test.
Hi Polarbear.
The first thing I tried was another fusing Unit. Now I have charged thermopile, socket with wires behind fusing, IOB/BICU/PSU PCB. Has run since monday.
Hi Eric.
Thanks for info. I have also checked the connector behind the fusing unit, which sometimes has been broken in the plastic around the connectors.
Hi Eric. Firmware has been upgraded and the maschine was total disassembled and cleaned just before delivery at christmas.
Hi all.
This maschine makes an SC when idle. Error not present, when we visit. Tried other fusing unit and connector behind fusing unit on chassis is OK. Connectors on PCB off and on - has worked...
New sep. pads have been made by Ricoh.
I assume you have changed the toner bottle as well after having problems with toner pump? Is toner coming down with "forced toner"? - else take off hose on back of toner bottle and vacuum from both...
All MPC models have problems with push switches in brigdes and they end as "Power ON" jams - so that must be the same for 32xxC switches.
If callibration does not help - change the touch panel - known Ricoh error