silahkan di coba dengan mengganti Memory RAM di controller utama
Type: Posts; User: mr.daus
silahkan di coba dengan mengganti Memory RAM di controller utama
How much sir,?
Try to reset an error boss before doing that sometimes it helps[/QUOTE]
How to reset him?
any body can help me to given a pdf file about removing itb unit image class mf8080cw?
what can i do on SP mode with sc220?
PCDU was cleaned and laser unit too
should me replace a electronic board?
any one can help me for solving my problem with code SC220 on mpc2030
no problem with image, but drop toner cyan only on dev and dev rail, any solving with my job?
the problem instead of falling toner drum unit but from the developer, rails developer to meet. toner finally assembled in the rails developers fall into ITB unit and participate printed as images...
My version of the system software version 91.03 and DCcont 73
I have long handles iprc7000vp machine I have not found on this machine problem solving.
always occurs toner falls on the printout, and after I carefully turned the printer unit cyan problematic....
if you've tried to change the paper size 11x17 with a new one?
there is a possibility that the size of the paper has a higher moisture content than the other papers:o
should first drain cleaning unit, replace some damaged parts. also clean the air filter on the front of the unit cleaning, air duct duct fixing consider whether there is a blockage? if there is a...
apakah setelah di nyalakan, indikator lampu kekuatan yang berwarna hijau menyala?
jika tidak coba anda periksa kabel utama listriknya, periksa juga saklar listrik utama pada mesin
gears on the machine does not need to use much less oil lubrication, use a lubricant pasta and it did not take much because the material is made of plastic gear
I also never thought I'd get to replace the mainboard PCB unit, I just want to be sure why the engine is not running normally, whereas once I replace the mainboard engine to normal without changing...
hi all,I have problems with the machine canon ir 6570, when worn copy appears suspended and not working normally, I finally replace the mainboard.
but i want to know what happened to the mainboard...
be sure to install the memory is correct, or try to clean the connector first before installing memory. if the temperature is heating up, it means that there is an error in the memory.
try chek the 52T gear, 75/22T, or replace the fixing upper claw
no. no. no. no.;)
done:D
i've problem on my c7000vp, he is miss registration colour
i've try clean on printer unit, ITB unit and replaced it.
i try DPC, AT-IMG-X, and Fadj on additional function
but this problem not clear...
chek some memory...RAM
try to check on the heater, fixing. see temperature
dear masters off copier...
any one can help for send me SST v3.3???
please send to firdaustrish@ymail.com
you must replaced Fhinisher control PCB for best prformance