thanks MCC-support.
i changed a new transfer belt and also the paper conveying unit but still.
Type: Posts; User: dynsam
thanks MCC-support.
i changed a new transfer belt and also the paper conveying unit but still.
hi
the error code C2730 is the transfer release motor inside the transfer belt. i replace the transfer belt but the error is still there. please need assistant asap. thanks in advance.
Regards...
hi copiman, thanks for the info. i will try and advice on the status
i have a brother MFC-9450dn machine and just replace with a new drum unit, belt unit and fuser unit but it still state on the report 0%. can anyone please help me on how to reset the units...
Thanks blackcat,i'll try those options and see because it doesn't have a DP attached to it, only plattern cover
hi all
desperately need help.. KM c2520 showing PLEASE WAIT...... and stays there for long and copy function cannot be used and there is a red light indicator on the copy button..
Need help....
hi all
is the firmware from singapore Taskalfa machines the same as Australia/New Zealand Taskalfa?
Need to know basis
Hi madas
even if i press the job status button or enter 10871087, the pop up still stays on the screen panel asking to insert the Key Counter Card.
It just won't allow me to go into service...
hi all, the taskalfa 420i was working properly until some one accidently enable the key counter option and now its asking to insert the key counter. there is no key counter options installed. please...
thanks you all
willtry it and send you guys back the outcome
Hi all, have been trying to fix that error display on the screen (Toner Life End) even though 2 new toners where installed. please need help to get this error message out so we can use the machine...
thank you very much Drazen and all of you for the information
A new FS6030MFP straight from the box. Indicate an error. Message showing on the display panel (Check the toner container. Open the front cover of the machine and pull out the toner container. Shake...
hi all
this is a new Taskalfa 180 straight from the box. when doing normal copy, its OK, but when the copy original that has a background is being scan for copy the quality is not the same as the...
hi, its been in the field. i did as per your instruction and updated the firmware and now it gives another error code"F000" it looks like the RAM. what would be your suggestion?
hi guys, please need urgent help. the machine when booting up goes to self diagnostic and gives the "error code F1D6" and it stays there. cannot also go into service mode
please need assistant asap
Hi All,
When doing normal photocopy (black & white), black is ok but when doing normal colour photocopy, black is not evenly distribute. Attached is a copy from normal mono photocopier and 3050...
try inserting the ip address only for the smtp server
hi frits, please i have the same problem and i really need the file to fix the problem. please my email: is darius.slncss@gmail.com
is RAM same on all KM models??
hi techs we have a TaskAlfa 300i recently purchased 2 week ago. when turned on it freezes on welcome screen with Memory indicator light on and Attention indicator light on and just stuck there....