I just sent you an email.
Thank You.
Type: Posts; User: yiiya69
I just sent you an email.
Thank You.
Thank You for responding. Where do I get the service CD?
I have a Xerox 8830 scanner with a 7356 controller. When I turn units on the scanner keeps displaying a clock and the bulb doesn't illuminate. Please help I have
a job that's due tonight. Thanks
I have a Xerox 8830 scanner with a 7356 controller. When I turn units on the scanner keeps displaying a clock and the bulb doesn't illuminate. Please help I have
a job that's due tonight. Thanks
Yes, replaced all the drums.
vertical banding approx 30 to 45 mm spacing. Primary colors look ok, its when you run secondary colors get banding. Shows up
more prominently in 15 to 25% screen running a secondary color.
...
WORKING ON XEROX 700 GETTING CROSS PROCESS DIRECTION BANDS APPROX. 30 - 50 MM. REPLACED IBT AND CLEANER ASSEMBLY AND 2ND BTR.
CHECKED DRIVES, RECEEDED AND CLEANED HVPS CONNECTIONS, SWAPPED FIRST...
Will do. Thank You.
Yes, here they are. I noticed that the lines don't show as much on a text weight as they do on a cover weight, but they are definetly still there. Thank You.
I have a Xerox 700 and I have light lines going horizontal across the 17" dimension they are several of them throughout the document. They seem to be appearing in the same place on all copies. Also...
Hi. Thank you for responding. When I put a paper clip in the hole all the screen says is close section properly. Then it says job completed improperly check the record. Any other idea's?
Konica minolta cf 2002 keeps giving an error code c0501, i can't get beyond this screen. Is there anything i can do to get beyond this screen to print?
mrwho thank you so very much!!! This worked!!! Thanks again.
I have an error code on Konica Minolta CF 2002, code is C-0251.
Machine will not run due to the error code. Any suggestions?