Search:

Type: Posts; User: eifling

Page 1 of 2 1 2

Search: Search took 0.03 seconds.

  1. Thread: C6500 skew

    by eifling
    Replies
    7
    Views
    1,301

    Re: C6500 skew

    Have you checked to make sure your ADU is not sagging? Had older machine doing this. Noticed the ADU kinda dragged when pushed in. Turned out some of the screws were coming loose.
  2. Replies
    3
    Views
    1,501

    [Jamming] Re: 6501 jamming issue

    No thanks. I get my manuals legally
  3. Replies
    3
    Views
    1,501

    [Jamming] 6501 jamming issue

    Have a 6501 with a jamming issue coming out of trays 4 and 5. The jam code is J-1607. I tricked the door open so that i could watch it run and I can see that the roller right outside of tray 5...
  4. Re: bizhub C6500 vs. C6501P print controller board

    Whats the diffence in spec matter? I've worked on boards and if they are not the same part number, they are not the same. I wouldn't chance it either but I would love to know the results.
  5. Replies
    7
    Views
    999

    Re: looking at a new box C8000

    I agree, the 8000 is a beast of a machine with the speed and quality. But if you have enough sheets to run to keep a 8000 busy I would skip the C452. I would get the C8000 but find a really good...
  6. Replies
    8
    Views
    2,607

    Re: finding konica c6500 service

    The one time someone actually wanted it and he dropped the ball ;)
  7. Replies
    2
    Views
    632

    Re: C8000 not fusing properly?

    Sure you have the paper weight set correctly for the thickness of the paper?
  8. Replies
    2
    Views
    4,696

    [Electrical] Re: C6501 - Error code C-4520

    Do you even read post before you spam them? ;)



    Anyways found another fuse blown on the image processing board, put a new one on and machine back to normal.


    Guess the moral if your getting...
  9. Replies
    2
    Views
    4,696

    [Electrical] C6501 - Error code C-4520

    This started with a string of other codes which led me to the image control board having a blown fuse (icp 1). Replaced the fuse which gets me to failing color registration.

    Problem is that the...
  10. Replies
    11
    Views
    2,962

    [CQ] Re: C6501 with Halo/Shadows on CMYK Text

    Are you positive its the engine and not the graphics and or rip? Reason I asked I have seen similiar issues where in the pdf it looked crisp but for what ever reason because fuzy in print. Tried it...
  11. Replies
    5
    Views
    1,285

    Re: SD-509 service manual

    I honestly don't know why anyone buys anything from you. Instead of being mature and explaining that a potential customer could get a better deal from you, you instead call him dumb? :mad:
  12. Thread: C6501 Skew

    by eifling
    Replies
    18
    Views
    6,226

    Re: C6501 Skew

    I think he was talking about taking a step up ;)
  13. Re: C6501 intermitant jams J-9301 and bent corners

    What kind of finisher? Does it do it going into subtray? Looks like its after fuser.
  14. Replies
    6
    Views
    2,200

    Re: C8000 Creo IC307 (job not processing)

    I assume you are importing the job from another computer or a server. Try this. Go to the file location, copy the file to the desktop. Then rename the file, when I have had this issue I just added a...
  15. Thread: 6500 firmware

    by eifling
    Replies
    1
    Views
    415

    6500 firmware

    Was wondering if anyone has the original version of firmware for 6500. thanks
  16. Re: Konica Minolta Bizhub Pro C6501 - OCE CS 665 ppm jumps in and out of registration

    If you can't help why bother posting.
  17. Replies
    16
    Views
    11,708

    [Error Code] Re: C6501 service code c2701 , c-2454

    Not true. If you do it from the I/O Check 54-09 it will not code when you do it.

    Also the guys problem all depends on how old his developer is. How old the developer housing is.



    Not all end...
  18. Re: C6500 Color problems - how to tell if color reg unit is problem?

    Don't worry about it. Some people on here get upset if your not a tech because they say your taking food out of their mouth. Some don't know or care that your just trying to make a living also by...
  19. Replies
    21
    Views
    4,979

    Re: ADU Konica C6500 doesn't work

    Have you cleaned all the rubber wheels from tray 1 to where it is jamming?

    Also check the motors in adu for broken wires. I had one that someone slammed the adu to hard and I guess it made the...
  20. Thread: banding C6500

    by eifling
    Replies
    5
    Views
    740

    [CQ] Re: banding C6500

    This has happened to me a few times. It's totally random like every 50-100 sheets. Someone told me it was charger related but the times its happened was usually followed by developer housing...
  21. Replies
    16
    Views
    7,219

    [Jamming] Re: C6501 wavy paper

    You check the one way gears in the fusing unit? I have that happen when they go bad or the shaft they are on starts to get worn. That or the bearings in the lower fuser roller.
  22. Replies
    7
    Views
    1,247

    Re: Toner for Bizhub pro C6500

    If you compare 6500 to 6501 toner, there is a tab that looks the same but its hard to tell that it is actually moved a slight bit. Also I didn't mean slam it in with the wrath of THOR ;)
  23. Replies
    7
    Views
    1,247

    Re: Toner for Bizhub pro C6500

    If you look up close to the neck of the bottle, there are 2 tabs on 6500 and 3 tabs on 6501. Take the bottle and jam it in the machine with just a little force. Then pull the bottle out, look at...
  24. Replies
    7
    Views
    1,247

    Re: Toner for Bizhub pro C6500

    Did you mean TN-612? If so why would you want to? They cost more than TN610.
  25. Replies
    3
    Views
    12,018

    Re: Bizhub C6501 error code C-4521

    So I imagine that you checked the springs over the sensors since you replaced color registration. Have you tried taping them in the open position, had that happen once where i was getting that error...
Results 1 to 25 of 44
Page 1 of 2 1 2