Just replace the punch unit if you've tried everything else - D4491117.
Thats all and its not that expensive for such a puny unit on such a big finisher.
I've done 5 or 6 in the past year and its...
Type: Posts; User: JDS
Just replace the punch unit if you've tried everything else - D4491117.
Thats all and its not that expensive for such a puny unit on such a big finisher.
I've done 5 or 6 in the past year and its...
Thank you Codex for this info. I'll ask Ricoh again.
If you have any written info about the bad batch of toner please send me the info, if that's possible and thanks again.
JDS Canada
Use sp2986 refresh mode for low volume copiers. Set 2986-4 to about 5k. It auto executes every 5000 copies.
No more issues and I removed these 2 vibrating plates 2 YEARS AGO.
I do have to mention that since then there may be Firmware for the copier and/or the Finisher to address this issue, they may have...
Reminder: That the MP6002/7502 series and newer has a REFRESH mode SP2986 that will help with the low volume copiers.
Execute it when you're there - 2986-4.
Or you can program it to execute after #...
Hello, i'd lke to find out if anyone has better fixes for this common and troublesome issue on the Finishers of the Pro 8100 series.
I've removed, cleaned and lubed the Press Plate Assembly. I've...
Thank you Toner Bomb and Slimslob:
Yes, it needs a copier to operate it then.
Jeremy D
Hello:
Does anyone know if the Perfect Binder GB5000/5010 (Ricoh model) can be used alone - offline?
Or does it have to be installed on a copier as in-line?
Note - this is the same binder also...
Does anyone know if the Perfect Binder GB5000 or 5010 (Ricoh model) can be used alone - offline?
Or does it have to be installed on a copier as in-line?
Note - this is the same binder also called...
Hi Mike:
Does this BInder work off-line by itself?
Or does it need to go on a copier?
Thanks.
Thank you Ruben. I dont have the permission to swap components but i could try formatting or replacing the Hdd instead.
I'll hold off trying the RAM sticks for now and wait to try some easier fixes...
Hello:
This mp 6001 copier is slow when using the top feeder on double sided only. Single siding is normal.
The originals feeds 2 then waits, then feeds a few more, then waits then completes. No...
UPDATE: September 2012 - This machine was finally fixed after replacing the Laser Diode assy PLUS upgrading the Engine Firmware - Version 1.67.04 W - came out in May 2012. Thanks to all.
Thanks Max, i will consider trying this along with another tip which is to change Process Control to Pixel mode and then see what happens to Vt and Vsp etc. Still waiting for the ID sensor though.
Hello z_ming:
I havent fixed my problem yet, i'm waiting for the PCU assembly
Hi Frank, there is a firmware upgrade bulletin for SC990 - Jan 6, 2012 in Canada.
Engine firmware should be 1.64.04 or higher. You should do the latest batch firmware download. I cant see how to...
Thanks Ollie, there arent any SC codes in the history, so no clues there.
The slit glass was cleaned during the PM in November, was quite clean anyway.
Has replacing the ID sensor fixed your light...
Thank you Jomama46,
Its useful to understand the concept involved in Process Control, thanks for the explanation.
I have ordered the PCU unit (ID sensor etc) and we'll see what happens after that...
Yes, i use Ricoh parts only for this D062 machine. I perform SP2801 for the dev initialization and then SP 2962 and these execute as usual.
About 1 mt for 2801 and about 2-3mts for 2962.
Internal...
Thanks for the reply.
No, this customer does not do heavy runs. I've tried reducing SP2209 (toner rate) to 800 or 750 and that hasnt helped at all.
Have also tried reducing SP2201-04 and SP2201-02...
Hello, this copier has been acting up since new. At 80k it went light - restarted Dev correctly (waiting for fuser temp etc) and copies look great.
At 130K light again - full PM done, drum,...
Hopefully you also cleaned the itb rollers before you replaced the itb belt. Try that. Another thing to try is clearing your DCON but remember to save your settings before clearing. This was a common...
Hi Dsourendro,you must try the "Clear Server" first (as Teckat and Vigour have recommended) before formatting Hdd and reloading firmware on the print board.
I think the steps for the...
I was told that the Boot Sd Card wasnt released for the B246 series (Mp5500 7500).
The Ricoh bulletin for the B140 Sd card (part#B6456090) clearly says that it cannot be used on any other models....
Hi, i just fixed an AF2060 with SC672 by replacing the main cont pcb and both main dimms.
Here's something that may help - Before the pcb came in i managed to recover the machine by removing all the...