Yeah, the guys have almost completed redoing the Point of Sale site (rlcpos.com) and are working on developing a redo of the main entry site (rlcbusiness.com). I did most of that design personally...
Type: Posts; User: cbs
Yeah, the guys have almost completed redoing the Point of Sale site (rlcpos.com) and are working on developing a redo of the main entry site (rlcbusiness.com). I did most of that design personally...
From page 3 of the Technical Bulletin:
Example:
The U332 defaults are changed to the following:
Level 1 = 2% Level 2 = 5%
Level 1 Setting: This equates to an average of 2% for each...
Garwin,
You bet. I have a 9:30 meeting that requires some travel time. Given that we're on Central Time, call my cell phone (918.457.7036) between 11a and 1p CT (9a-11a Pacific). I should be back...
Gar, we're working to expand our company here in NE Oklahoma (about an hour from Tulsa, Fayetteville, and Ft. Smith) areas. We need someone who understands sales from the "consultant/service/support"...
We have been selling Kyocera-Copystar for years and have become more than dissatisfied with their support of smaller ($1 million in sales and under) dealerships. What are your all's thoughts about...
It depends on what your prices are for each tier. Just remember the tiers represent a percentage per color and remember, in most cases, a combination of C/Y/M is used to print the end result. For...
Hytec isn't repairing these boards yet (they do the 255/305 but not the FS6525/6530). Anyone know of a source besides Kyocera?
we've disassembled and reassembled 8 or 9 times.... we'll keep trying.
OEM toner is being used.
I can't get to the Service Mode to reset disabled selection fast enough before the error message reappears.
We have a Kyocera Copystar 255c in the shop that we had to replace the toner nozzle for cyan (got clogged). After, pulling and reinstalling the front panel (the gray plastic housing that secures the...
They have premise based version; it is pricey though.
We went with ConnectWise.
FS1128MFP PCB that the exposure lamp plugs into has a blown capacitor next to the plug where the exposure lamp connects. Hytec doesn't repair the scanner assemblies any more. Kyocera doesn't sell the...
We have a CS/KM3050ci that is displaying the message Add Paper in Cassette 1 (Letter). See attached photo.
There is letter (oriented properly, with type set to Plain) in the tray. The "continue"...
We have been asked to quote a service agreement on several Xerox 5875's. I'm interested to know what's the going rate (including PM Kits and toner); where can a non-xerox dealer get manuals, parts,...
Be a Technology Management Company (copier/printer/network/voice/vendor services/project management). Become every customer's "go to" technology organization and coordinate any services you don't...
How are techs reporting their time throughout the day to make sure billable, non-billable, administrative, training, etc. tasks are documented. Not to keep track of the techs but to make sure...
You can load other manufacturer's color tables if your customers don't like Kyocera's.
The NewTaskalfa (3050ci's, etc.) were already great color machines. If you are an authorized Kyocera or Copystar dealer, someone from your dealership more than likely went (or at least was invited)...
1) Download the firmware from KDA Connect and save file
2) Extract file to folder
3) Copy the files to the root directory of a USB Thumb Drive (make sure no other files are in the root directory)...
Will do. I went ahead and order the entire fuser drive assembly from KDA. Expensive but, maybe not, if we have to go back in down the road.
Is FAX FORWARDING enabled?
Getting ready to replace our first fuser gear and motor on the KM6030. I've read some posts suggesting replacing the whole assembly vs the motor and gear. Besides time is there any reason to replace...
Service Technician needed for comprehensive technology dealership (copiers, printers, phone systems, IT services, etc.) located in Tahlequah, OK. Looking for tech with IT skills and enjoys office...
Make sure all the contacts on the high voltage distribution board that angles into place and making good contact. The springs and plastic catches don't line up well. Plus because the machine doesn't...