The glass is clean. In fact if i switch another Adv series feeder on top, it works fine.
Just this particular DADF give me crooked like. older IRC has no this issues.
I have 3 advance DADF with...
Type: Posts; User: icopier
The glass is clean. In fact if i switch another Adv series feeder on top, it works fine.
Just this particular DADF give me crooked like. older IRC has no this issues.
I have 3 advance DADF with...
Oh no! How come i missed that out. It's a IR ADV C5035.
It's happening on the dadf only. using glass, is prefer.
How could i align my DADF?
Thank you..
Hi guys,
Have anyone come across this? beside adjusting the mounting screw on the right, are there any adjustments to be done?
I have checked the manual and need to key in the set of numbers in the...
I have just switch the drums. same issue.
"It was the shutter assembly that looks at the color density on the ITB had somehow come disconnected from the Selenoid that actuates it and was not...
i actually printed some documents from the customer pc. as the documents are confidential, i did not upload the images here.
The images does have the "Cloudy" effect too.
Solid colors for YMCK...
Hi fellow techs,
I am back with a new issues. I just receive a Canon Adv C5051.
Prints prefectly on full black and full color (pls see my PG10)
however, when print shades or graduation, you can...
After changing all the parts mentioned, the problem still remains.
Today i replaced the black drum and it work! I took the faulty black drum back to factory to try again on another machine...It...
Very valuable information!
I am not sure, but it really seems to have something strange on clearing the DC-con and R-con. the "Ok" buttons pops up almost instant and all the settings still remains...
Will bring the black developer, drum and maybe ITB to test on monday.
ANy reasons why I am unable to clear the DC-CON?
Thanks and will update on Monday!
the PG10 has black background in the non-image area as well.
Single color has black background in the non-image area too.
May I know how can i check the black drum grounding?
thanks for your...
Color seems okie with PG10. but still have the black shade.
And i am aware that the fuser film has a small tear but the customer prints only b/w so it is fine for them.
Crititcal issue would be the...
Hi guys,
I have this issue that there is a black shade on the paper. Was fine last week but after 1 week (machine kept on) but no print/copy jobs, the printouts became this (see attached)....
Hi Ernesto and Teckat,
It worked!! Appreciate your kind input!
Dear all,
Recently faced with 2 machines with similar issues. Canon iRC 3380 and 3080.
Everytime when the machine is restarted or wakes up from sleep modes (during warming up),
the tray will pick...
Hi guys,
Need advice from you guys.
Printout was fine and nice when tested in factory, but when shifted to customer premises,the prints smudge (pics attached).
Done:
1. Change all all drums and...
Maybe just 1 or 2 out of the lot may have issues. Did u change only the black drum?
Seems that the ITB unit was the issue. Changed the ITB and it works.
The old itb transfer belt seems a little loose, is there a way to "tighten" it?
Thanks everyone who helped in this issue!...
Hi guys,
Seems to have a density issues even after change of drum and developer unit.
The colors can't seems to get solid, esp on color shading. Pls see attached.
Prints of full color will result...
Will be trying Hdd tomorrow.
It was from same location whereby before initializing was completely fine.
I still have the Dprint and Pprint.
It just hangs at 11th minute and restarts itself and initialize again and same thing...
Hi vigour,
There are no additional fiery or cables from what i see.is there any way that i can access the service mode?
Thanks
Hi,
What do you meant by equation? How do i get pass it?
Thanks and hope to hear from you soon. great that i see hope in this machine!
:p
Dear all,
I just gotton a Canon iR Adv C5035. All works well.
As usual, we normally initialize the machine before deploying out to customers.
Here comes the issue.
The initialization will start...
Hi guys,
I am looking for the Canon iR Adv C5030 C5035 service and parts manual.
May I know if anyone has it? I could pay a token sum for it.;)
Thank you and hope to hear from fellow technician...
Media type is only a4 (PaperOne) Have not tried from other trays. Will do it when i get back to work in the next 8 hrs. Thanks teckat!