Edge of paper was getting lots of specs. Put in new xerographic module. No help. Got printing fault, machine not available. Emptied old developer and added new, cleaned well and made all connections...
Type: Posts; User: wmarkland
Edge of paper was getting lots of specs. Put in new xerographic module. No help. Got printing fault, machine not available. Emptied old developer and added new, cleaned well and made all connections...
Will print all PDF's from all clients except the ones coming from DRF. Daily Racing Form. Error undefined-OFFENDING COMMAND:zzzzz!!!#F274^=!!*~
That is the entire housing. To replace that. One screw in front, disconnect wire harness on left side. Disconnect toner rod to waste dispinser. Pull unit out. Can save money by ordering developer...
I will walk you thru it. Not hard. Call me when you have the developer. May be a good idea to order a doner roller to put in while you are in there. Can clean old one. I have the instructions along...
Usernames and passwords have been verified a dozen times. It accepts the usernames and passwords through the add scanner wizard but then rejects the logins when scanning back to the PC. Even when...
I am in GUI interface over the web trying to get a new filing destination for scanning to pc and I am being prompted for user name and password. I nor owner know what it is or can find it. What are...
Have recently upgraded to Windows 7. I can not scan to PC. Scan to pc is enabled and I can print to workcentre pro 65 but not scan to pc. I now have 1 pc one WCP 65 connected with 1 crossover cable....
My tech has now informed me tha I have made a mistake. Sorry. He says now that there will be only one computer and one crossover cable involved and needs scan to pc path. Thanks.
My network consists of two computers with crossover cable. We are trying to set scan to pc path from xerox wcp 65 printer/scanner to pc. IP for printer is 127.0.0.1, Subnet Mask 255.0.0.0,IP for pc...
Getting a consistant loud screech from a fairly new developer unit.
Xerox workcentre pro 65
and Dell computer with 2 routers supplying DSL and Verizon phone.
1. Xerox Workcentre Pro 65 2. Dell Computer
IP Address: 192.168.1.41 192.168.1.106
Subnet Mask:...
Xerox workcentre pro 65
and Dell computer with 2 routers supplying DSL and Verizon phone.
1. Xerox Workcentre Pro 65 2. Dell Computer
IP Address: 192.168.1.41 192.168.1.106
Subnet Mask:...
Login failure and user password and/or setups is the job status error message. Can someone help to remove this error? all other info, path are correct. Please give steps. You are helping a fellow...
Centerware finds scanner. When finish is selected CAN NOT CREATE DIRECTORY cw_scan. What creates final folder?
No. My guy fixed up a laptop to connect to copier and thought the cd's that said PWS on them would make the laptop a PWS laptop. He could not go any further as he was being asked for PWS version 8.1...
Xerox installed and enabled scan to pc several years ago. It no longer works. I have had Xerox affiliates here and have purchased NP/ST 01.02.027.1 S/W Kit,Ro1.02.024 PWS,DC/ST v7.19.05.026 S/W part...
Need IT person to connect Xerox to pc in Richmond Virginia.
Can not scan to pc.
Depository information does not match. How does one configure?
How does one modify default templates
Document path
Is there a default user name...
Just need some assistance with setting up my scan to pc (network Scanning). I have the CentreWare Network Scanning Program but it does not want to configure correctly. Thanks!
What and hhere is the batc sensor?
A week ago copies started getting dirty on a fairly new Xerographic unit so I ordered a Xerographic module. New xerographic unit arrived Monday and displayed printer unavailable, printer fault.Monday...
I have 5 Xerographic Modules which will not work for various reasons. The following are the fault codes .
1- 9.304
2 -9.334 Toner control patch low
3- 9.334 & 9.350
3- 9.338 & 9.350
4-...
I am now receiving an error 9-334 stating "Toner Control Patch Low". Just wondering what this is. Thanks.
I am also receiving error code 9-380 stating "Transfer Arc Fault"
I am getting error number 9.380.00 and 9.338.00 pages have really bad quality.