Search:

Type: Posts; User: its_just_a_copier

Page 1 of 6 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    7
    Views
    1,386

    [Misc] Re: ImagePress C7000VP

    Are the fusers warming up?

    Any paper stuck behind any drawers?

    Any recent error codes logged in service mode other than the E720?

    Check all 3 Front Door Interlocks.

    Also check the staple...
  2. [Misc] Re: How I Change pressure pad ass"y FM#-1217-000

    This is part of your lower Fixing Belt Assy. If you are going to change this, yes you should have the Service Manual handy because you have to dig into the Fixing Assy to do it. Too many steps to...
  3. Replies
    8
    Views
    2,030

    Re: irc 4080 question

    Yup, I've seen the H1 regain connection after doing this. If that doesnt work you may have to reload the H1 system software.
  4. Replies
    10
    Views
    6,213

    [Error Code] Re: Canon IR 3380 E025-0000

    Does that cable guide help at all? It looks as if they just added a shelf to keep the toner from falling onto the sensors and board below... My problem is if they knew the toner dropping was an...
  5. Replies
    21
    Views
    3,769

    Re: Mpc 6501 error only on print

    SP5875 Auto Reboot Setting

    Set to 1
  6. Replies
    21
    Views
    3,769

    Re: Mpc 6501 error only on print

    SC899 has been mentioned quite a lot in the firmware updates so make sure its up to date.

    Also format your HDD SP5832-001. This has fixed many SC899s (Before doing this make sure your address book...
  7. Re: anyone know for serving wine with ipc7000vp?

    KILL 15 ?

    that board looks like it went through a fire or something...where is it in the Imagepress?
  8. Re: Firmware ir5070 - firmware ir5075 son iguales?

    quizas no era compatible disco duro?

    era de Canon o que?

    cual es el numero?

    FK2-7429-000

    1
  9. Re: Firmware ir5070 - firmware ir5075 son iguales?

    Claro, este firmware es IR5070/IR5570/IR6570 solamente!
  10. Re: Firmware ir5070 - firmware ir5075 son iguales?

    https://dl.dropboxusercontent.com/u/20401763/iR5570_6570_sys_v42.01_.zip

    Feliz Navidad =)
  11. Re: Firmware ir5070 - firmware ir5075 son iguales?

    Son distintos seņor.
  12. Re: Canon ir3235 not fusing on heavy paper

    Most likely you are running the machine out of spec.
  13. Replies
    3
    Views
    626

    Re: E0020-0293 en ip7000

    Check COPIER>DISPLAY>DPOT>VFF if your value for M is higher than all the other colors (400+) you have a bad LASER FM2-4887-000.

    (normal range is 200 ~ 300)

    Some have been successful in...
  14. Replies
    5
    Views
    1,178

    Re: ir C4080 blue backgrounding

    OK...

    Open your front door, remove the inner cover. You should find some pink papers, these are your factory service mode values. Check everything and make sure your service mode values match.
    ...
  15. Replies
    5
    Views
    1,178

    Re: ir C4080 blue backgrounding

    Is your Cyan drum coated with toner? If so replace it...
  16. Replies
    10
    Views
    2,306

    Re: Washed out autograd

    Well since your PG10 and AutoGradation sheets are washed out you can forget about any CCD settings... that's just off the glass.

    What are your drum lives showing? Have you cleaned all the...
  17. Replies
    10
    Views
    2,306

    Re: Washed out autograd

    First of all, what model Canon are you working on?

    Second, Have you printed the PG10 from Service Mode to see if it is also washed out?
  18. Re: Canon iR 3220 Print Colors Much Darker

    Are you using a Postscript or PCL driver?

    Either way look to update the driver from Canon's site www.canonusa.com.
  19. Re: Canon iR 3220 Print Colors Much Darker

    Does your machine have a ImagePASS?

    If so has it been calibrated?
  20. Replies
    3
    Views
    1,032

    Re: iR 3045 Finisher

    Error :
    For various error codes and malfunctions. If you suspect that the Finisher Controller PCB may need to be replaced, try the following to reset and clear the memory of the Finisher...
  21. Replies
    2
    Views
    728

    Re: irc4080 shuts down

    Could also have a short to one of your thermistors in your Fixing Assy.... seen them shut the machine down before with no error code whatsoever.
  22. Re: Canon ir c4080 - imagepass fuzzy prints

    That's a driver issue. Your customer is printing a process black, and the driver can't raster it properly.

    Change the driver. :D
  23. Replies
    8
    Views
    2,130

    [CQ] Re: Canon iR-C4080

    Any blade can leave wavy lines, the reason they do this is to prevent premature wear & tear.

    At this point you should remove each drum and transfer belt unit to see if these lines appear on the...
  24. Replies
    5
    Views
    1,139

    Re: Push in fixing unit message

    I've noticed those big screws that hold the hooks loosen up over time.
  25. Replies
    1
    Views
    979

    Re: ir5055

    FM2-9766-000 Thermistor Ass'y THM1 & THM3

    FM2-4161-000 Thermistor, Sub THM2

    :cool:
Results 1 to 25 of 134
Page 1 of 6 1 2 3 4