Search:

Yes. Can you help?

I am looking for the above manuals. I will trade for Toshiba, Lexmark, Kyocera or Ricoh manuals. Please reach me at jverzicco@tscopy.com. Thank you.

The EPROM part number for Toshiba EPROM's is M27C4001-10F1, but you need to buy a generic burner. We use an old one from Andromeda Research. The files are still on Toshiba's FYI site, and we only use...

Did you do a 3/clear 3 and 3/clear 2 prior to updating the firmware?

I agree. I have seen this before, and it is caused by a problem with one of the color epu's. EPU binding, corona short etc.

Thanks for the info Teckat. The customer wants the HDD's removed before sending them back to the leasing company. I will let you know about your offer. Thanks again-Jim

Hi-I need to remove and replace the HDD's on a Canon 3225, 5050 and 2525.We are a Toshiba dealer with no experience on Canon's.Are the Canon f/w updates done via USB thumb drive? Does anyone have...

E0-12172000

Hi-I was just informed by my boss that we will be taking on a number of the above machines.Does any one have a list of error codes/service mode directions that can help me learn more about this...

Does anyone know if it is possible to reset the fuser and transfer belt maintenace light on this machnie without replacing the units? Thanks-Jim

They are the same box bout 356 is 5 copies faster.

I am looking to hire a full time HP technician in the south Jersey area. Please contact me at jverzicco@tscopy.com if you are interested. Thanks-Jim

I am looking to hire a trained HP technician in the south Jersey area. Please contact me at jverzicco@tscopy.com if you are interested. Thanks-Jim

I had this on a 656 & updated f/w to v1500 to correct it.

Try going into 1 & 3 mode sub code 338 & make it a 1.

User Function, admin, general, pop up, disable drawer set.

I apoligize to everyone as well, including him. It was none of my business but I know you always help anyone that needs it & I didn't think you deserved to be scolded. It's nice to know we CAN all...

I wouldn't give the idiot anything. Let him buy the manuals from the manual guy if he has that kind of attitude.

I had a 3510c doing the E011 thing & after replaceing everything around the cling sensor I replaced the whole fuser for laughs & the intermitten problem went away. Put the fuser in question in...

It is hard to tell from your pictures but this machine is famous for the drum drive gear slipping. Check the screw that secures the drum drive gear because it comes loose. Good luck.

I'm sure it is the setting stored in WORD that is causing the problem. Have them change the setting to go to the bypass. Toshiba drivers get trumped by the settings in WORD.

Yes

The ES 355 does NOT need a doggle. You need to re-check the model number & re-post.

You have a problem with either the charge or transfer/sep corona. It could be anything from a broken wire to the hvps. Good luck.

What makes you think you can use the data overwrite enabler on multiple machines? Toshiba maintains that it is linked to the serial number & it can only be used for one machine.