thank you !!!!!!! is a great tip
Type: Posts; User: cesar.m
thank you !!!!!!! is a great tip
hi, i have a problem similar, in my case the problem is a fuse on the power supply of the finisher was burn it, if you want check it
for me that resolve the problem.
hi sergio do you have any system software of a fiery i need the system image pass s1 and s2, i have the manual of c1 we can change it
saludos!!!!!
sorry, xcopytech but what are they patches??? and what is the order to install them??
i have it if you are looking yet send me a mail
hello, i had the same problem, is the memory of the image pass the only thing that you have to do is increase the memory 512 mb more that's all
Good morning,
i had a problem with a fiyery ex 260 when i send a file with corel draw the image come distortionaded like a big spot, and when corverting the image to bit maps the image is ok any...
yes in fact there is a couple of errors 3-347 and 3-316 are repetitive. In other machine i can repair it easy the hdd was defective and the port usb 0 too, but in this case i can't do it. i change...
a friend have it
nop i changed and i restore the software and i clean te ccm, and i replaced the firewire cable too
but nothing the machine it dosn't response
i had a workcentre 7665 with green bar freeze and at the end comunication firewire problem the firmeware is 040.033.53050 somebody had a alternative
i had the same problem in 3 machines in one of them the battery of the NVM was dead less of 2.80 VDC in other was the SIP board IS AFFECTED and the last one, the software is corrupted in all probles...