it sounds good, i'll try to download soon
Type: Posts; User: engineer
it sounds good, i'll try to download soon
have you check the wiring between the printer control board and the write unit may be pinched, if you have try all that mention above, better you try to replace PRCB.
corona lifetime depend on humidity, temperature and cycle. better using original corona.
error 13 after color registration manual?
there is no different between black and color drum unit.
is in display still "warming up"?
if error code appear shortly after power ON, it Failed HV/2. Reseat CN736 on the PRCB and CN737, CN738 and CN739 on HV/2. or Replace HV/2 (p/n A03U M404 00) as necessary.
whats wrong with your fusion board?
You can using Separation DC (Front) and (Back) adjustment if you having problem with poor quality in damp/ moist paper. separation AC also same if you have poor quality. but do not do separation AC...
check the clutch, with I/O check (as explain above), check the piezoelectric sensor.
nice machine with much problem..... :)
usually it cause from human error, be careful handle this machine, the second transfer belt is very sensitive, if you doing wrong procedure sometime you can damage the belt
c7000 is successor for c65xx with 1200 dpi and they using IDC sensor compare with c65xx using PGC sensor, stabilization of density detection more precision.
c7000 is good machine, they have 1200 dpi resolution.
try dot 2 or line 2
Check the fusing position, check all connector, make sure everything oke, and doing this adjustment:
Utility => Stop => 0 => Stop => 0 => 0 => 1. This is to prevent accidental reset of the code and...
have you try another paper? maybe the paper is damp.
i have same problem like that, its cause from toner clogging, check toner supply unit, toner supply drive is same with waste toner drive, so if the toner supply is clogging, the waste toner also...
hey guys, is there anyone know about c 8000 problem if we print black 100%, the black color not too solid if we compare with c6501.