Turned out to be Ran Maintenance mode 140 took care of Im told
Type: Posts; User: dpoutz
Turned out to be Ran Maintenance mode 140 took care of Im told
front to back of machine duh
have fun have all the parts you need and find a nice place to rip it apart
Thanks for info yes no fun to get out had to do numerous cassette motors
if its like the mpc5503 in paper tray setting you set tray to auto paper select I believe
I tried it would upload file Ill try again
we have a brand new 9003 with op to non op lines and voids from op to non op ; its a series of lines then ok for about 7 inches then more lines but not the same pattern. its not the drum unit .it...
we have a brand new 9003 with op to non op lines and voids from op to non op its a series of lines then ok for about 7 inches then more lines but not the same pattern. its not the drum unit .it...
2233 the 2316 I believe is for the 1060/9001/9002 only the 2062 was replaced by 2233
No only 1 hdd
We use new gear on all that series users fyi
Flats spots don’t help but they break a lot the updated gear is Ab012233
Yes it is a Kyocera 3550 i believe same except no smart op panel
when updating firmware on the c9100 you have to change a bunch of sp settings if you don't you will get quality issues not sure if c7100 is the same its a c9100 bulletin
Hello what was the resolution? thx
No real fix change dpi for scanning and mixed size originals but the main thing is using superlube or tri flow and clean and lube any bushing and 1 way you can on the front and back of adf this...
Our company has 1 c9100/6 c7100/7110ex/and many c5100s for true heavy duty production the c7110/7100 have been great. we haven't had many issues with 5100/5200 at all just not sure if our customers...
ive had a customer running carbon originals and IT will multifeed but not with regular originals Ricoh said they don't support carbon(NCR) originals through the adf
bigger waste toner bottle and the 03 will actually run envelopes unlike the 02
No we have not tried these have you yet? if so how long to install kit and how have they been working ? thx
We have had extreme luck with cleaning and lubing all bushings,bearings and one ways you can find on entire adf
reset 806182 hold down C
we have a 465n that will be working fine then all of a sudden the scanner just starts going about 4 inches back and forth from home slowly non-stop. if its during a copy cycle it will jam. the lamp...
we have this on 6 units with papercut. at first we tried setting sp5420 to 1 but still having issue had to disable paper cut for now. did you guys have something similar? Thanks
UPDATE We found the problem was the brand new belt unit was missing a bearing under the belt for the bias roller right out of box. and the reason the first one shredded after 2000 copies was...