Opps... Talk about a major foobar ! I knew it had to be something stupid and that was it...
now my question is why did that not reset when I reset to factory defaults in program mode???
Type: Posts; User: verderacer
Opps... Talk about a major foobar ! I knew it had to be something stupid and that was it...
now my question is why did that not reset when I reset to factory defaults in program mode???
Ouput is set to internal tray for copies and when any finisher is connected it outputs to lower shift tray on finisher. No error codes or jams are reported.
Sort is turned on. Output is directed...
Have you checked the music sensors at the transfer belt?
The current download PPD should have what you need if postscript is installed and functioning properly on the copier. If you are using CUPS then its a crapshoot at best and usually color does not...
Ok gang !
I have a MPC4500 that will not output to the internal tray or finisher upper tray regardless of what type of finisher is used, both SR3030 and SR790 have been tried, or tray is selected...
Thanks for the info all. As soon as the rest of the parts are in I will be there... Gonna bring the feeler gauge and check out that gap too as it has me curious.
In regards to default values,...
Hi everybody... Its been a while and just got thrown a D011 to work on. Have not performed a PM on one of these in some time and since its been a few years I thought I would ask our pro's out...
Some additional: I have the NT system booting but 1/2 the time I still get the 3-319, the other half of the time the copy interface comes up but just says there is "a system fault has occured" and to...
Hey all,
Getting a 003-319 error which tells me its a video driver detection failure. What the heck is this?
Story: Customer moved to a new location and needed to setup their old...
Yes you are correct Ciaran. There is a dial on the right side to determine paper size and orientation. Thanks for providing me with the other models that use the same trays !
Howdy all,
Trying to determine if the paper tray 2, 3 or 4 on a IR 3380i is the same as a IR C3200 or IR 3220. If not does anybody know which other paper trays will work?
Thanks in advance !
I have read several of his posts recently... They have been most helpful !
What I am really surprised at is how can Sharp tell him he cant post on his own time?
I second that with Gift. I have seen this issue on both the 161 and 171. Also check alignment of the door too and switch alignment too.
151 = Finisher entrance sensor B830 - Sensor defective
155 = pre stack sensor error--check and clean prestack sensor
Courtesy of Gooses Guide !
So you need sharpdesk to setup scanning to the desktop. Is this a per seat licensing for each desktop, or is it per mfp?
Right now I am just trying to support existing customers on various...
Where oh where do you get Sharpdesk??? I dont see it on the website, and I am going to need at least XP, Vista and Win7 versions. Where do I go to download it?
This is the most unusual scan syntax I have ever seen. I have no problem with ftp and smb connections but the uri is totally foreign to me. I did some searching but not having finding what I need....
Here are a couple of other ways to test also.
If you have a company laptop, just hook it up directly and setup scan to folder to it, or setup setup another email box with the techs help with a...
Im with totoro on this one. I have experienced the exact error and it was an issue with the customer email box capacity.
Unfortunately the clutches are crap and just stocking 2 at all times is the best solution. I have made them part of my regular car stock. Changing T1 is just such a pain though.
I believe this has something to do with waste toner?
Any help appreciated
Did I do that !
DOH ! :eek:
I believe this has something to do with waste toner but could use a little further clarification.
Thanks for the help !
Try this check.
Remove both T1 and T2. With them removed reach back to where the paper feed shaft is at and try to turn it clockwise. I usually turn it counter clockwise a bit then try to turn...
Yea, its getting kind of ridiculous what they are expecting us to do on every call. Here at Ikon/Ricoh the list has gotten longer and with our ball and chain hhd (hand held device) it takes even...