After installing a maintenance kit, I went into workflow (U952) & performed all adjustments without incident until U412. After scanning the density print (with 20 sheets over top), I got S001. I...
Type: Posts; User: bustertech
After installing a maintenance kit, I went into workflow (U952) & performed all adjustments without incident until U412. After scanning the density print (with 20 sheets over top), I got S001. I...
Thanks for the response.
I have an E001-002 on a Canon IR2270 and per the manual, I need a subthermistor. Does anyone have that part #? Thanks in advance.
Buster.:mad:
Mojo,
I'm reading this as do Sim 61-4, then 44-13 (w/jig), then 44-2,6,26,24 and finishing with 67-24 prior to 50-22. Is this correct?
You know as well as I do that any paper with a brightness less than 96 isn't going to give decent color rendering. Anything over 102 will have a cyan tint to it and generally yellow tint under 92....
Thanks Mojo. I just got onboard at this sharp dealership and am new to sharp color. I've yanked a drum and yellow Dev unit from another 6201. Along with these adjustments, I'm hoping to cure a...
Thanks for the reply to my thread. I'll try that. At least this isn't Ricoh color. The 6513 (revolver mach) had a bevy of adjustments as well. You even had to adj fuser with every PM.
It's the MX-6201. I gues I didn't make that so clear, much like the adj. process for Sharp Color. I've been tortured b4 but not like this. The Konica-Minolta 5001 was incredibly complex to balance....
Help!
Have run SB-083R on MX-3501N and had no problem. Went to run it on a machine that has yet to be fully calibrated (per the bulletin on MX6201N) and now, besides not making it past step 9...