G'Day Guys, I tried changing the dev - fixed the patchy copies but then I ended up with back-ground I cleaned everything still had problems with bg, managed to get a s/h pcu and try it - bg moved to...
Type: Posts; User: xs650head
G'Day Guys, I tried changing the dev - fixed the patchy copies but then I ended up with back-ground I cleaned everything still had problems with bg, managed to get a s/h pcu and try it - bg moved to...
Thanks for all your suggestions - I will check them all out soon and let you know the results
cheers
Keith
Hi Guys,
Most common cause of patchy copies (they say in the solid areas - I havn't had chance to see it yet) I hope this will be drum or charge roller that need replacing what do you think?
...
These may also be very helpful !!
Thanks heaps - this should make life easier
Full marks to Paulg,
It turned out to be the big white gear (that I am still trying to get the part no for!)that drives the big rollers in the turn-around had been slipping on the shaft, I have...
Hi Guys, I need a service/parts manual for the ARDF unit on an aficio 2035e as the main manual doesn't cover it (it may be an A548).
cheers
Keith:)
xs650head@hotmail.com...
Thanks for the reply - I do lean towards the sensor theory, I've been looking in the service manual for some kind of description of the sensor locations but there doesn't seem to be any reference to...
Hi Guys,
I have a problem with a ricoh aficio 2035e that continually stops when attempting to use the adf and reports a 'j006 document misfeed' error.
I have checked the document path and it seems...
G'day,
I have a couple of problems with a canon np7161 that was supposed to be jamming. at first look the paper was stopping with the lead edge about 30mm out from the fuser, also it was showing an...
:)G'day Claudio,
I have since sorted the funds and bought one .
many thanks for your reply.
regards
Keith
G'day,
can anyone please help me out with Canon NP6030 parts and service manuals?
regards
Keith:o
Just a quick message to say 'THANKS' I revisited the copier today and re-fitted the new fan (M4) powered it up and the error c0040 came up, opened and closed the front door and 'presto' it started to...
Thanks for your help - yes, I believe that this model also has a reset button, I will try this if opening and closing the front door doesn't work.
Many thanks again for all of your help.
...
Thank-you, I will revisit the site on monday morning and try this out, I can't believe that I didn't do it whilst on site!!
thanks again
The filter was a little blocked and I cleaned it well, my problem is that the error is still there even after changing the fan and cleaning the filter, do I need to reset the error somehow? As iI...
G'day, I have a problem with a minolta EP5000, it has an error code of C0040 that shows about 10 seconds after powering the machine on.
I have read all of the posts on this that indicate the suction...