when your lower Fusing belt steering motor malfunctioned it moved your fusing belt to far to 1 side just center your belt by hand when fuser is cool
Type: Posts; User: lucky13
when your lower Fusing belt steering motor malfunctioned it moved your fusing belt to far to 1 side just center your belt by hand when fuser is cool
sounds like photos were scanned in with a bad scanner try rotate file and see if lines follow image or stay in same
place
and PS UPLOAD IMAGES SO WE CAN HELP YOU
LU-202 not an option as well
just replace the sensor there is no adjustment or calibration there is another one in duplex drop down unit not worth time and trouble to swap just replace it it is common these sensors go out
...
thats strange the c8000 came with an RU508 and HM101 as options are you positive you have an ru509 with a hm102 that came from a c8000?
im not sure maybe thicker or thinner tired of all the different part # and back orders stuck with A9VE500100 seems to work fine on every thing
i have a bunch of c8000 parts on ebay right now rollers dev unit trans belt . trans belt cleaners one price take it all
Konica Minolta C8000 developer unit upper fuser roller transfer belt + More ...
i have a dev unit upper fuser roller heat lamps trans belt cleaning units x4 trans belt + many parts
Konica Minolta C8000 developer unit upper fuser roller transfer belt + More | eBay
yes they are interchangeable i use the embossed one on most type machines
just so were clear is it the C8000 printer control panel with bad boot screen or is it the Fiery print controller /command work station big silver box not booting
asking for a friend ?
sold
i wish i could delete my post once an item has sold
PLUS EXTRAS fuser belt ,fuser gears ,shaft seperating plate , adu actuators
Konica minolta PM kit C6000 C7000 C6501 C5501 C6500 + bonus extras genuine OEM | eBay
512145121551216
$425 free...
toner like any other commodity you want to buy low sell high, but in my case i was able to buy this toner $25 a btl from a mom and pop print shop who serviced and supplied their own machines ....
this item has been sold
this item has been sold
sold
wow my question is who kept filling the paper trays and off loading the finisher with rubbish being printed
selling 1 lot of 3 sets 13 btls of Konica Minolta C6501 C5501 toner TN612
customer went out of business and left all his unused supplies the per bottle breakdown
works out to be about $53 a...
yes its needed it comes with the c6100 bundled accessory pack its part # is also in the c6100 parts manual under accessory parts
have you tried resetting max densities all to factory {recall standard data factory} then re-adjust
i have 3 sets of tn612 + extra yellow 13 btls on ebay now about $53 a btl all oem free shipping
13 btls of konica minolta C6501 C5501 toner 3 sets of toner YMCK + extra yellow | eBay
replace part 17 A03U841000 the black paint wears off and tricks the sensor 4835048351
like what toxic said i/o ps53 24-1 with door open and adu rolled out do not press start button and manually flag ps53 does should show 000 non pressure then flag it and see if goes 001 pressure.
i would up date to latest firmware and IO Check (99-70) and check if there is a problem with the PRIPB or the writing unit