Search:

Inverted display in ir 3225.

yeah facing same problem.
Changed all boards and supplies but keep getting same issue.
Any suggestions.
Machine first showed e00227 then after replacing main power supply it got resolved and I got...

I have a big problem with an 2270 go, I get the message constantly RIGHT SIDE DOOR CLOSE RAND I changed the door switch, I changed the Power Supply, the Dc controller and all plates have the machine,...

hi I have replaced that j314 harness and DC controller.still the message is there.changed microswitch and all boards but message remains

The problem started with e00227 code and I replaced scanner...

hi me facing same problem.changed all but the issue remains.if u have any solution pls share

thanks sir.problem sorted.toner sensor was shorting.replaced same.
Machine working ok now.lets see

Error code e00024_001.changed dp unit .again showing after 5k copies.
May be tonner hopper sensor

i have replaced same with another working one

While duplex printing and copying when the paper moves back to duplex section machine is showing printing in status bar .
Machine keeps on showing printing and there is no jamcode but machine is in...

Sir in duplex machine shows printing.changed ip and dc and also cross cheked them.they r ok
All ok.but machine shows status printing while copying and printing in duplex.

Do me a favor please...

facing error code e00227 in canon ir 2870. is power supply faulty.

Hi
Thanks for the suggestion.i have cleaned same today.lets see what happens.it is heavy volume machine around 1200 copies per day

Chek and suggest.facing problem in ir 2870.changed fuser,laser,drum unit.still occur after 10/15 copies

Will do the same.

The drums i am using are working on othr my machines.i have ordered new magnet rods and spacrers lets see .

Some drums are scratched on sides .some r ok.

The problems makes the drum unusable.changed pcr .right door transfer asssy hvt

Swapped the dp with another machine it works there.

But these are dark bands

Ir 2870

Both while printing and copying.this problem is like a virus.it started in 2870 and i have 2 more machines with same problem.i am using same drum and toner on my other machines and they r wrnkg fine.

iam facing this problem of black bands emerging on copies even if i change the drum.It is happening in 3 machines.I have changed the drum.pcr,hvt,drum unit.
new drum only yields 200-300 copies.Image...

oops u nailed that one.it can be the main reason.

the Ps9 and ps11 are the paper path sensors .Ps9 located below fuser and ps11 in fuser unit.Try to replace or clean all the feed rollers as this kind of jam mainly occurs due to delay in paper...

true .also cross check the HVT board if the copies are blank.It happens may times and if they are all blank then charging or laser .If only photocopy is blank then the optics as suggested .