I've follow these settings, but still the same…
I don't think is alignment clutch because I did print 10 pages in a row where image not shifting…Anyhow, will try replace it on next visit…
Type: Posts; User: didi2005
I've follow these settings, but still the same…
I don't think is alignment clutch because I did print 10 pages in a row where image not shifting…Anyhow, will try replace it on next visit…
Have 2 units of used e455c having paper fold mark. Replaced feed & separation roller or swapped whole feeder unit, adjusted the z-fold codes, but problem still persist...
42874
I've encountered where when feed using RADF, after press start button to copy the feeding roller will not go down following paper jam code. Found out is RADF board issue...
Used e2540c where the color machine not using color at all, only print black & white. The problem now is the developer worn out very fast, less than 10k print the developer will depleted and need to...
When you want to update the firmware to the latest one or the equipment becomes inoperable due to some defect in the firmware, updating can be performed as follows.
Updating with the USB device...
U can try disable IP Conflict Detect via TopAccess.
For e4508A, I've replaced new HDD, then a month later replaced SYS board for the same unit...
Common error is from fuser side where the upper heat roller & themistor not lasting...Heard that there...
I dont have the service manual...
After cooling for a night, just now I able to power it ON, and working, but after shutdown for few mins, it cannot power ON and it hang on "Please Wait" booting...
Document Centre 286 hang on boot screen showing please wait...
Any ideas what is the cause and actions than can be done?
This SMART info just a reference…I've encountered many cases both value is 0 but still need to replace HDD.
U can set 2 dates for the notification, u can set the interval around 3~4 days, then not a issue...
Of course, if one week holidays, no internet access and etc, then is another story....
The...
U can enable counter notification on the MFP when it can send u counter list via Email or Fax.
For Email, u need to setup email on the MFP, whereby for fax u need fax board & fax line.
Today encountered another cases...
C3A0 or install new magenta toner error, where no magenta toner go inside developer unit...The mixer scrapper is gone, luckily there is enough magenta developer,...
U can try disable web services print via TopAccess so that it will not be detected by Windows and auto install print driver using WSD port...
U can do it via TopAccess
1. Upload latest software (Installer Setup files for Client Utilities CD-ROM)
or
2. Disable Print Share Via SMB Session
— Select this to enable the file...
BC,
Using genuine toshiba toner...
The seal is another issue for this series causing leaking resulting gears broken...
The replace toner error will jump from 1 color to another color if u r...
40282
Recently encountered many weiss series where it keep asking for toner even new toner is inserted, the toner will keep going inside the developer tank causing toner overflow, image related...
Try scan to E-Filing? But client pc need to install file downloader software to connect MFP and download.
Put compatible toner in Toshiba MFP is a disaster...especially newer type where the toner comes with chip...
I wonder how the chip work?
If I have 2 genuine toner cartridge with chips, can I...
PWB-F-SYS-364S is the System Board part no, printed on the board, last week I've just replaced e232 system board, same part no.
As what I know, the NVRAM sticker normally indicates firmware...
PWB-F-SYS-364S is e232 models
ADI HDD--> SATA cable-->SYS board
U can also check the board part number or firmware version.
e-STUDIO203/203L/233/283/202L/232/282
6LE88455000/6LE90509000
ASY-PWA-SYS-377S
If connect via network, u can download e160 GA1031 driver, is working fine for windows 7.
If connect via parallel cable, then a bit troublesome, u can use viewer 2 driver...
I remember all those e2550c series came with 8GB SSD drive, where we need to replace 320GB ADI HDD and enable some 08 codes...