Search:

Type: Posts; User: Gaffers01

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    413

    Re: C257i Powers Off

    Ive been back and changed the CPUB board and the storage board but still have exactly the same issue,
    Im leaning towards a DCPU issue but ive never had one go before so still a bit reluctant to...
  2. Replies
    3
    Views
    413

    C257i Powers Off

    Hi,

    I have a C257i that keeps powering off and the only way to power it back on is unplug machine and it will come back on and work fine.

    I've updated Firmware to latest available even powered...
  3. Re: C220 (Like C280 C360) issues with bypass and both tray 1 and 2. Jam but no paper

    Id replace the 2 rollers that are touching each other they look pretty worn (they should look like the roller on its own)

    This is the easiest point to start with any fault finding with jamming.
  4. Re: C220 (Like C280 C360) issues with bypass and both tray 1 and 2. Jam but no paper

    If it jams but no paper being feed, its usually the bottom of the 3 rollers (separation roller).

    Also just check that the paper is loaded properly as you will also get this issue if there is a...
  5. Re: Very Light Copies when using glass or dadf C8055

    Try a double sided copy through the dadf to see if the second side is the same.

    What about scanning? does that look the same
  6. Replies
    2
    Views
    485

    Re: AccuPrint C4065 Fusing problem

    Are you an engineer?

    Did you do the work on the machine?
    It looks like there is no pressure between the fuser rollers which is why the sides of the image look fine.
  7. Replies
    3
    Views
    623

    Re: Xerox Fiery Impose issues

    Impose has a license, so maybe an issue with the licensing.
  8. Replies
    0
    Views
    1,084

    Service Manual Toshiba E-studio 5015ac

    Hi,

    Does anyone have a service manual for the Toshiba E-studio 5015ac, im doing a call for third party and haven't looked at a Tosh for a few years. :confused:
  9. [Dead] Re: Altalink C8170 Enter Current Password Message is Displayd at Start Up !!!

    Need to do "Special Altboot"
  10. [Dead] Re: Altalink C8170 Enter Current Password Message is Displayd at Start Up !!!

    Can you attach a photo that is bigger ?
  11. Replies
    10
    Views
    1,213

    Re: Bizhub C558 blurry color prints / images

    Samples?
  12. Replies
    3
    Views
    534

    Re: Xerox C8070 Jamming

    Ok machine is now working :cool:

    But is still a weird one :confused:

    I went back to the customers to have another look and managed to get a copy through all different trays by choosing colour...
  13. Replies
    3
    Views
    534

    Xerox C8070 Jamming

    I have a Altalink C8070 that is jamming EVERY copy from tray 1 - 2 and MSI but tray 3 and 4 both work no problem.

    The paper stops folded with no image on it before the ITB (quite difficult to see...
  14. Replies
    4
    Views
    760

    C8070 No Magenta Image

    As the title says Im working on a Altalink C8070 on the latest firmware 103.003.023.22910
    where there is no magenta on anything copied or printed including test prints.

    I replaced Drum R3,...
  15. Re: C759 Backgrounded prints, only from scans

    Have you tried a different file format when scanning ?
  16. Replies
    3
    Views
    700

    Re: Versant 80 press error code 005-130

    Make sure NVM 711-188 is set to 2 and restart machine
  17. Thread: Dead C364

    by Gaffers01
    Replies
    11
    Views
    1,116

    Re: Dead C364

    Did you swap the SSD over from the Lightning strike machine?
  18. Thread: Dead C364

    by Gaffers01
    Replies
    11
    Views
    1,116

    Re: Dead C364

    Lightning strike could of potentially killed everything in the machine, including wiring loom, control panel.

    Have you tried to install Firmware as you said there is now power?
  19. Re: Konica Minolta c454 coping / scanning issue

    Samples ?
  20. Replies
    1
    Views
    319

    [Dead] Re: Versant 180 - stuck gears - nasty sound

    I would recommend getting a trained service engineer to have a look, you could do more harm than good taking the back of the machine apart.
  21. Re: Konica Minolta C7000 dark lines on all colors. Replaced transfer belt

    The 2nd image looks like its the cyan drum unit that is causing the lines, replace the cyan drum.
  22. Replies
    8
    Views
    1,098

    Re: C1060 with code C-2821

    Haven't worked on one for a while, but i remember having a few issues with the IDCS assy which would be have to be replaced.

    Also could be Transfer belt or drum what do they physically look like?
  23. Thread: C4070 Drums

    by Gaffers01
    Replies
    0
    Views
    266

    C4070 Drums

    What is the main difference with the DR620K and DR620?
    Can the DR620 be used as a K drum unit.

    Also can the Du106 and Du105 be used in this machine, I know the end needs to be changed to fit in....
  24. Replies
    2
    Views
    829

    Epson SC-T5200D RESET

    Hi does anyone know how to reset the admin password on this device?

    The customers IT man set the machine up and has since left and we have been asked to set the machine up to scan but I cant get...
  25. Replies
    11
    Views
    1,388

    Re: 116-324 printing PDF for C7030

    It sounds like is a formatting issue, going from memory when you print an adobe pdf it gives you an option to "print as image" under advanced.
    See if that helps as it should then not format it.
Results 1 to 25 of 301
Page 1 of 13 1 2 3 4