Replacing fusing belt for troubleshooting that problem, i think
Type: Posts; User: rangertech
Replacing fusing belt for troubleshooting that problem, i think
after replacing drum units the life counter is not cleared, i'm already to replacing drum unit CMYK of bizhub c220 but life counter is not cleared for drum unit black only. the counter life is...
U can check i/o check mode in service mode 54-09 make sure the value 127 or less
thanks all, but i have been to change developing unit and still appear like before, problem still happen
Hi all,
Error code c-4520 in my bh c6501, and i look at the output print with test mode 58 (3 color cyan, magenta n black) cyan have a problem but for another color its good. Look like my attachment...
Please help me, for this trouble. . . test mode print 58, cyan not good. . . Any suggest. . ., look like the picture. . . I havebeento replace drum,charging,1st transfer, hv detecting/drum...
clean the color registration sensor and adjust color registration from service mode...
i'm with horse,
u mast setting enable on Enable Desktop in controller setting
Try to calibration controller....
i'm with habik, i'm sure, develop can use Fiery Controller..
i'm with Gaffers01 too, replace developer for solve problem..
thanks for replay Prakash,
i'm sure, the CDB part number is newer and dipsw38-2-0, and still occure missregister 2nd side 5mm.
PF4,5,6 but only at 2nd side.
anybody help me, missregister duplex only on 2nd side app. 5mm on BH C 8000 ( for 1st side ok)?
thanks
i think the problem in fusing unit..
i have'd same problem like that. reinstall fiery and i can use fiery remote scan again.
clean the TCR sensor or replace with another color to make sure trouble in sensor component or mechanic.
can you print test mode ane by one color magenta, cyan, yellow, black, for make sure the problem in one color or all color.
you must download file animation movie.exe from kmsupport and then input that file to machine with usb flash.
maybe the problem in application software pdf. have you try create new file multiple page pdf with another pc ?
try to clean the ph unit color section and second transfer roller.
i'm sure only from bypass, if i print from tray its more better than bypass.... skew approximetly 2-3 mm
i have'd problem skew print from bypass in km c451, i allready to check size paper its ok..
Any ideas for solve this problem? thanks
Re: Konica Minolta Bizhub C451 no print from network
make sure the networking cable cross or straight ..
Re: color setting and management in konica minolta C352
if the problem only on print, you can try print with pcl printer driver its more bright.