"It's like deja vu all over again"
Type: Posts; User: Tata
"It's like deja vu all over again"
Actually Poli means many, tics = blood sucker.
Politics = Many Bloodsuckers
Or what the terrorist mom said while looking at a picture of her children "kids... they blow so fast"
"And when they are affraid they taste like chicken"
You have just described Obamacare!!
I checked the mylar in the invertion unit, it was OK. I had the problem with the mylar a couple of times but when the mylar is ripped it would jam rigth there, at the mylar. This thing moves the...
Face up works. Only when is copying face down that I have the problem. 2 of ten copies would jam.
Thanks NRTech but when I replaced the bypass unit I cleaned the gear cluster specially the 1 one way gear. I haven't tried the vertical feed ass'y. but remember it does not jam everytime but every...
I am working on a Konica/Monolta bizhb 600 and it is jamming (code C1702) and the paper ends up past the invertion upsidedown under the duplexer. The copy went past the fuser and it kept going. Here...
Thanks for the help. I just found out the guy that installed the MK may have not clear maintenance code U251.
I'm going to go and run that code before I do anything else. After that(if it works)...
I wish I would have known that before we installed that MK. Thank you for your help.
Thanks everyone for your response. We contacted Kyocera and the response was that we have to install a new MK. They say there is no way to do it otherwise. If you remember the code to reset it it...
Calling to install an MK even after a kit was installed. Kyocera says istall a new kit... Any other way around it?
See attachment for reason.
......a copier salesman.
There is a fine line between a machine and a pile of junk. I think yours qualifies for the second. Call Sandford and son. Ha ha ha!
If you do what some do at school, that is flip a coin for the answer, you are going to find a teacher that would flip a coin for your grade. You might get an A but either way you will know nothing.
Yup! Adjust DF height.
907tec and Kronical are both saying the same thing. If you do not use an IU that is new or has a chip that has been reset the machine will continue to ask for a new IU. It's like a fuse on a belt....
First: remove the paper from the trays.
Second: There is a magnet at the bottom of the copier. Demagnetize it so i t doesn't grab the metal stand you have the copier on.
That should work.
I stand corrected.
Thanks
It's the Flux Capacitors. There is one for each color, you know!
Thanks Perth. It turned out to be the one way gear on the Manual Feed Unit(56AA 7716 0 BY PASS FEED INPUT GEAR A 24T0) that needed replacement.
Thanks MCBIG. I had already replaced the board and M5. It turned out to be the one way gear (56AA 7716 0 BY PASS FEED INPUT GEAR A 24T0) on the Manual Feed Unit that needed replcement.
Bizhub 600 Jamming from trays 1&2 only. Codes 3101 and 1701.