Search:

I know this post is a couple of years old but what model does the ct-3100 cassette come from and is it a pf unit or the main cassette for the model
Thanks

No way to disable this yet. Hopefully Kyocera will come out with a f/w to toggle this.

This is brilliant I have done a few reg sensor located on the HV board replace and clean and always seems to correct the problem In retrospect it was probably turning the machine onto it's back and...

I know this is a three year old thread but I just wanted to confirm Mita's diagnosis. I just had a ta 2552ci with Mag and Cy missing turned out to be drum drive couplers. Thanks!

Like I said. Won't the fixing unit throw a code if the sleeve stops turning?

I am not sure but wouldn't the fuser throw a code if the pressure roller stopped?

I have an Ir 3030 that is jamming and z folding, The lead edge of sheet is always at fuser nip and it seems the drum is turning, as there is a distinct black line on sheet from the drum turning and...

Yup well buddy (car mechanic) has a spare he is going to let me try out, I am too old to give shit if I look goofy as long as the tool I am using is an improvement and can help solve the problem. I...

I have been plagued with a shit ton of mfp's that have developed various squeaks. Has anyone ever tried out one of those amplifying stethoscopes with probes to pin point the location of
these...

I can confirm that indeed removing the machine from prior kfs dealer list solved this issue

I too am having the cannot connect to remote server issues and only ever on used equipment that has been registered under a different dealership name. I will contact Kyocera and ask them to clear the...

Can any one give me a quick review on this MFP a client of mine asked for some input.
Does it scan to smtp? SMB
Does it require scan software?
The average Mthly Volume is about 1500
Thanks for...

Everyone of these machines I have in field are generating calls for grinding noise. Has Samsung come up with a fix for this? Or is it still the same old Toner Cartridge thing? PS the exit units will...

Ok so I dug out a e260d that I had laying around pulled the hvps from it and popped it into the e360dn and presto. Works like a charm
case closed

Hello I am working on a clients e360dn has blank pages. Replaced Drum and toner cart. Examination of Drum= vertical lines of toner and no visible print Vertical lines are not transferring to paper...

Ok it turns out this drive is not recognized in windows disk management or Ubuntu. I removed the drive tapped it on the sides checked it under disk management (still not showing up) put it back in...

I do know that it is a 1.4gb drive made by HP
There is no format function in the manual
It is totally unclear what file structure they use
Apparently some firmware my be preloaded on these hard...

I would think they should still show up under disk management like any other drive I have attached to my laptop. I have attached non partitioned non formatted (raw) drives and they show up. The only...

Hello I am getting the E10 2 error The hard drive is plugged into slot 2, upon removing the hard drive the error goes away but printing is sketchy especially with pdf. It is a laptop IDE hard drive...

This was finally resolved it turned out to be a sticky op pannel Hard buttons

I have a client with a 3220 sounds like the hard drive on the fiery is packing it in (boots sometimes not others makes noise) They do not have the system software discs and I was wondering if anybody...

For the Admin or return email addy make sure you input a valid email address. I have been stung by this in the past some smtp you can put in fake emails and some you can't. I have done some that have...

A client of mine has a T 640 it would not feed envelopes through the MP tray without a push. I changed the pickup roller and put an almost new sep pad in and now it double feeds or stream feeds the...

I believe tech did it but I will check to make sure thanks

Have a client with 300i when scanning to email it locks up He gets a call (he is I.T.) goes to machine it is in home screen (copy) with memory light flashing no reaction on any buttons or touch...