You said the toner motor turns on
I say the toner turns on? Check it.
Type: Posts; User: ELIAS G
You said the toner motor turns on
I say the toner turns on? Check it.
It s possible the gear who touch the motor gear is wearing (wear and tear)
Hi,
the technician has right.
Hi
D-2230 isn,t for this model.Try whith the right D-3500.
I need for brother fax 2820 service manual
thanks a lot
HAPPY NEW YEAR to all
We are working on TOSHIBA -KONICA-CANON-RICOH-BROTHER-HP-SAMSUNG .........copiers-mfp-faxes-printers
Hi , as you describe ,you must find the reason that not falls toner in dev unit.I think there is not the right auto toner adjustnent.
HAPPY NEW YEAR.
happy new year !!
Without personal problems
however many in machines !!!
brother fax 2820 switch off at procedure copying or printing for some seconds and re-swictch on itself ?
Thanks.
Hi from ATHENS,
To michaelc: I changed the rollers and the probleb stays.Thanks
To siriopev:ευχαριστω φιλε,θα το δοκιμασω μετα τα χριστουγεννα.Καλες γιορτες
MERRY CHRISTMAS to all
Hi everybody from ATHENS
E 712 JAM RADF on a STUDIO 280.I CHANGED THE REGISTRATION SENSOR AND ALL THE SENSORS. I CLEAN CAREFULY REFLECTORS .
I HAVE TESTING THE RADF PC BOARD ON ANOTHER RADF AND IT...
Good morning from athens to all
have a good week and a happy new year.
Many-many thanks to all for your help.
specially to esam ramadan . your help was the solution in this problem.thanks a lot...
GOOD MORRNING FROM ATHENS
THANK YOU ALL
MICHAELC : it does intependently of number of copy one or more,exactly at the end of procedure .
BOJANS :format is ok but the problem stays.
e studio 650 says wait after the end of copy for about 15 seconds (the machine is runing) and then goes to ready.
I have change all the thermistors , toner motor and recycle motor are ok.
Any...