Search:

Is it only on duplex copies that it curls in the finisher? I have had a similar problem that originated from the duplex section of the copier.

Are you in a high humidity location. I would replace the corona wires and the charge grid. The first thing on these is to replace the corona wires, if you talk to panasonic that is the first thing...

Check the magenta cartridge and see if it is an original or a refill. If it is a refill that may be the problem as alot of the rebuilds are not done properly. I am in Canada so I don't carry the...

All of the new generation panasonics are this way, have worked on lots of them. Do not restart the developer on any of the panasonics it creates havoc and more problems.........Duke

Enough of the sarcasm, I have been in this business for 40 years and I don't assume anything as you should.....Duke:D

Did you try another magenta cartridge, most of the HP cartridges now have id chips in them.....Duke.:D

They are available free from the Canon web site if you are a Canon dealer.........Duke

These are great little machines, just have to keep them clean and they will work well for you, also install with a good power isolater or protection cord. It weill save you some grief.

Duke, here in Canada, (Saskatchewan) we are paying $5.11 cents per gallon. If anyone should complain it should be us.
n.o.e. ltd. Saskatoon, Saskatchewan, Canada

You can also try Static Control top or Summit Laser Products SUMMIT TECHNOLOGIES, they both carry the bulk toner.

I will not use Katun toner in the new machines at all, to many quality problems. The older machines seem to handle it okay if you change the developer to katun as well....Duke

:mad: the update only marginally increased the speed by maybe 3 seconds, do not expect a miracle on this one........Duke

Check the ground connections especially at the back of the drum unit, I have had oxidation problems with the ground connections. I emery cloth sand them and then apply a coat of chemtronics contact...

My nightmare was a SCM 150, they were impossible to service. We could only stick wires(very stiff ones) in through holes in the frame to remove paper jams. If you had to realign pressure fuser it...

Go into the default/counter stteings, select the fax default and network default and scroll through the settings to the IP settings and change it there.........Good Luck

This one is not bad, although we turn down charge and increase transfer to eliminate drum and dev problems. Work just fine then.......

Check the power coming in, it has probably damaged the power supply just enough to cause the C-41 code to come up. I beat my brains up on this before I found it.........Have a great day.

I have had the main board cause this as well. Have a good one......

My nomination would be slit glass streaks and document feeders and paper jams that customers should be able to remove themselves. These seem to be the top ones I get. We have invoiced some of our...