Search:

what version and system ic408? maybe any patches must be installed.

Try change the Lower Belt Unit on the Fusing Unit with the new one.

Bizhub C7000 trouble C-3102.

ICP14 was damaged. And then I changed CDB. but still C-3102, ICP14 was damaged again.

I changed PRCB, Fusing Unit, DCPS/1, DCPS/2, ACDB, and CDB with new one, but...

Try cleaning the encorder assy and sensor board assy on drum drive CMYK. And clean sensor PWB assembly on belt drive.

How about printing test mode from machine?

have you try use dot2 or line2?

jackson007 machine not new. Thank you.

EarthKmTech i will try replace the MFP, thank you

I have trouble for Bizhub C220.
Sometimes the first print result is full block black colour but not any error code appears.
I already change the IU Black, Developing Black Unit, and High Voltage...

maybe you can checking the encorder assy intermediate transfer unit.

Dear eifling,

I was replaced the color registration sensor unit. I/O check solenoid shutter and the result is good.
Developer about 30%.

Thank you

Bizhub C-6501 have trouble code C-4521.
I replace:
- Color Registration Sensor Unit
- Printer Control Unit (PRCB)
- Transfer Belt Unit
- All Writing Unit
- DC Power Source/1
- Image Processing...

Bizhub C6500 have trouble C-4520 everyday and every morning about 3-4 times.
I have made sure the transfer belt is not walking.
PRCB, Color Registration Sensor, and PGC has replaced. But the...

[ No errors are displayed only constant " now adjusting " ] --> try cleaning the humidity sensor machine.

data count of special part. u'are welcome

try check the 1st transfer Cyan.

try clean the PGC sensor.

You must enter the service mode and reset the Dust-proof filter/1 and Dust-proof filter/2. The dust-proof filter/1 location in the right side beside bypass and dust-proof filter/2 in the rear side...

Thank you Gaffers01, i will try your advice

Inutelkamo: art paper 150gsm and 210 gsm

try cleaning the write unit (P/H unit) Black.

Konica Minolta Bizhub C6500 with Fiery IC-408 has printing result straight line on main scan in leading edge.
Use thin or thick paper have same result.
I was cleaning 2nd transfer, change the...

Yes, with disk method I can install or upgrade the Fiery. But I want to try install or upgrade with USB flash drive, maybe it can make simple.
Thank you Emujo...

I was followed the procedural for install System Software using USB flash drive from Konica Minolta technical site and service manual for IC-408.
I was download the Fiery USB Prep Tool but while I...

Konica Minolta C6500 with Fiery IC-408 V2.0 System8.2
How to install System Software using USB flash drive on Fiery IC-408 version2.0 system8.2??
Can anyone help me please...

try change High Voltage Unit/2 (HV/2).

try setting the domain on machine.