1st rule of copier repair: Never trust customer's IT. They lie all the time.
Type: Posts; User: Exok
1st rule of copier repair: Never trust customer's IT. They lie all the time.
The best way to troubleshoot this is by observing the POST (power on self test) code. Find out what the code it at the point of rebooting itself.
The sensor on the door in the upper right of your photo, check the actuator. Its the part that hangs down into the paper path. The paper needs to push it so that it moves the actuator out of the U...
If the units are still in good condition, you may be able to buy the CRUM (customer replaceable unit meter) and just replace that. Keep in mind when looking for these items, there are 2 different...
This problem is often caused by binding in the IBT or lack of drive to the IBT.
First, check for excess grease on the drive coupler on the IBT and the drive coupler on the machine frame side....
I'm thinking he means the UI is blank.
You'll probably need to replace the UI Display Assy.
And if you are buying toner from an individual seller such as from Ebay, you really don't know what you are getting. You may have a machine that uses "sold" or Non Metered and buying from a guy who...
With that POST code, you should do the following in this order:
1. Reload system software. (Altboot or Forced Altoboot)
2. If problem persists, replace Hard Drive and then reload system software....
Its not dc130, its DC131. 616-014 is if you are getting a message on the screen that the machine is in a "non customer mode". Nothing to do with what you are having. Are you telling me that the...
I don't know about the boxes but just about all xerox machines have 2 types of toner depending on the billing status of the machine. 1 is called Metered toner (if you purchase your toner directly...
There is no 7355 that I know of so It's probably a 7535.
Most often cause for single color streaks is a bad drum unit for that color. As far as not seeing the toner, they may have inserted the...
If you have a 7845 that keeps rebooting, 1 thing that can help determine why is by using the POST codes. (Power On Self Test) Look for the 7 segment display located near the network plug. Just before...
The magenta marks going from front of the machine to the back looks to be a bad drum. The multi color stripes going in the paper path direction look to be a bad transfer belt cleaner.
The line looks too thin to be dusting on the LED printhead. Enter diagnostics and print solid test patterns in each color to determine what one is the cause. You probably have a chunk of hard toner...
Click on the blue link in my original post to take you to our website to find job listings you can apply for.
Enter diagnostics and print each individual color as a solid test pattern at 50% fill.
Looking to hire a field service copier tech for the Northern NJ area.
Xerox products.
Copier Repair Technician - Rochelle Park, NJ - Stewart Business Systems Jobs
Looking to hire field service printer tech in Northern NJ area.
HP, Xerox, Lexmark.
Printer Repair Technician - Rochelle Park, NJ - Stewart Business Systems Jobs
This can happen if the paper buckles too much at registration. The paper is not laying flat as it passes under the drum. First, ensure that it happens from all paper trays & bypass. If it does, start...
303-332, Network Controller Communication Timeout. This can be caused by loose connection or improperly seated board. Reseat all connectors, PWBs, EEprom & memory PWB on the single board controller. ...
Stewart, A Xerox Company looking for a field service printer tech for Northern NJ (Bergen Co - Warren Co).
https://stewartxerox.applicantpool.com/jobs/
For more information, contact Katrina Oyola,...
Did you find a solution to this one?
Easy enough to check. Remove the drum cartridges, transfer belt cleaner, the transfer belt lock lever, the 2 brackets on the left hand side that hold the belt unit in place. Slide out the belt...
One of my techs ran into this problem a while back. Many things were tried / replaced and ultimately, the thing that fixed it was replacing the Single Board Controller.
If you already tried replacing the LCD display, it could be the board that powers it.