Thanks for this. It solved the error. =)
Type: Posts; User: mark121381
Thanks for this. It solved the error. =)
HI. which switch on the battery jumper you make. can u please show. i have the same problem, i installed the fa option but not working or even showing on control panel. thanks in advance it will be a...
Thank u mr. Ernesto. How to clean laser? Do i need to remove manually? Or what?
Dear All,
Need help. Canon IR C1021i unable to continue full auto gradation. at first cannot continue because machine showing all cartridges are need to change due to quality are poor. So I...
In Philippines they are using NPG Toners. So you're right maybe in ASIA
Thank you all for sharing your ideas. it will be a big help this to some readers. ;););)
Ok Now I understand, i thought I can use a USB even without the enabler. is there any way I can get that enabler?
Ah I see. It seems need another option in able to work.but how about the usb . Is it also need the enabler?
Hello,
Need help on Toshiba e-studio 282. I am trying to use this machine as a printer. I downloaded a driver from this site e-STUDIO233 Monochrome MFPs: Support & Download - Toshiba e-STUDIO ...
Thanks for the info because I am using GPR replacing some C-EXV. Thanks again
Me too. Thanks for your time =)
Good day to All,
Just want to ask what is the difference between C-EXV Drum unit or Toner to GPR Drum unit or Toner. Because we usually use C-EXV Drum unit and toner here. Is there possibilty of...
Thank you for sharing this. Im just upset for what happen, at least they informed us for what will happen, anyway it happened already. I think it will help this thread to the others, Thank you all:(...
Just want to ask if the drum cartridge of IR C1028i which C EXV26 can be work on the model Isensys MF8450 because the drum cartridge use by MF8450 was Black 711 Color 717? Is there any problem if i...
Is there other way to restore the firmware or the boot for this model?
When I checked the version of main board and Boot Version using service mode in IR C1028i the version was blank at all. any suggestion how to load again the firmware or the software to boot up...
Sir Teckat,
I tried this holding down the # and 2 both together then turning on the printer. but it is failed to show the "usb download available" . You know i tried this to my other machine ...
good day,
I tried to update or install the firmware on the machine. at first canon logo will appear after turning on the machine, then, after that the same problem it was a blank screen due to...
I already have the copy of address book and some user data, but my question is why it became black screen after I CLear All. It is only clearing a data not any firmware on the machine?
Thank you Sir TEckat for always respond and helping me. Actually sir. I always did the Clear all option in some High end Copier Canon models But I did not expect this on this model. Can u tell me...
Ok sir thank you for the response, I think so, this is my last hope to overwriting the firmware. But I just wondering how come, it will wipe the firmware and the worst is replacement of Main PCB. I...
Good day to all,
I have a problem right now. The machine printing fade quality. I tried to change all the drums and ITB assy but still faded. I will explain this later. My exact problem is i tried...
Thank you sir for the response. I tried to spin it and still rotating. anyway I will try to replace it.
Sir I try to rotate and spin the parts but still keep on jamming
Good day,
Can anyone help me please on this. It's always jam on PS13 as per history of jam in service mode. the jam stops inside of fixing unit as it always. I tried to clean all the pathways such...
update:
We change the ITB Ass'y. Performed auto adjust gradation, all was working fine. thanks to all:cool: really appreciate