what brand could it be?
Type: Posts; User: cleardata
what brand could it be?
is this real?
http://www.youtube.com/watch?feature=player_detailpage&v=tPJsyFKkwxM
yes the fuser is the problem with these models based on what i've read in this forum.
i would like to ask which one is better for you between c5180 (year 2006) or c5185 (year 2007)?
what's the...
i provide machines to my customers. are these models, irc4080, irc4580 and irc5180 though old, durable machines with less issues? or are there any other models you can recommend?
thank you in...
hi to all,
i would like to ask for your comments/suggestions/recommendations about which model/s of canon color copiers are durable/workhorse with less issues from 25ppm to 75ppm? i am currently...
gotcha!!!
hi eric. based on online info, the monthly duty cycle of the first three models is 100k which i think can handle a 30k monthly volume but these are, as stated by mikadonovan, TONER BLOWERS. the...
thank you very much jermyth. i'll try your solution.
best regards to all.
hi to all,
i'm quite new with risograph and the machine has an A34 218 error and based on the manual it says "request to resetting the master". number 3 is also lit but my problem is i can't pull...
now i understand why he has a red mark! he deserves it!
sp3103 is .31 and sp2223 is 268.
i made a temporary fix with the machine and so far it's working fine now.
the problem that the machine won't display "loading toner" after opening and closing...
compatible toners are very unreliable. they make reliable machines like them, unreliable.
no it hasn't. i'm thinking that would be my next move. what i did to make sure that the toner really drops from PCU to the dev unit was i took out the PCU front cover (the bulky one that locks the...
thank you for your replies.
mylar is good.
developer in good shape and mixes well.
hopper is good.
bottle is correct.
toner bottle motor is good.
what i did today:
replaced IOB
thank you iowatech.
yes the developing unit is in good shape and the toner path from PCU to dev unit is ok.
toner and bottle are correct.
i will try replacing both IOB and toner motor.
do you...
hi to all,
model is aficio 3045. with less than a hundred copies it shows the add toner message though the bottle is still almost full. i open and closed the front cover but what i see is the...
giving him a rep power will do, i think. i gave him 1 by clicking the star button below rep power. many thanks.
try searching about sc819 for there was another solution about this problem. if i'm not mistaken try to turn off lan in the sp mode then turn it back on. worth a try before replacing controller.
many thanks to all for sharing. big help. :rolleyes:
hi to all,
i would like to ask for your comments/opinions about the performance of canon ir 4570, 3045 and 3245. don't know much about these models. what i know is that ir4570 was released in...
it looks like an ld unit problem. try replacing the laser unit from a working machine or if you have extra.
i used baby powder and drum powder, problem keeps coming back after a few hundred or a thousand copies. just had to replace it with another transfer unit. as i stated in my post that this happened...
thank you for all your replies.
i don't think it's a toner issue otherwise all my 3045's would have the same problem. the transfer unit was working well until the belt became dirty because the belt...
interesting. i never thought toner could cause this problem. thank you. i tried putting silicon oil to lubricate the belt but it's not good. i will try the drum powder as mentioned by iowatech. is...
thank you rthonpm.
i also encountered this problem on machines that has not been used for many months. it looks like the transfer belt is too dry to slide the blade smoothly. putting powder on...