check charge corotron and clean it
Type: Posts; User: Tropix
check charge corotron and clean it
Today i have same problem do you solve it ?
xerox 4112
problem with jam at duplex fault code 77-111
paper jamed in duplex when change from 1 side to 2 to 2 side and and inversely, when going more then 3 paper ( 1 work fine )
and when...
Hi i have problem with print SR A3 see pictures
http://s3.postimg.org/vh4dnpoqn/2014_04_11_10_56_58.jpg
http://s30.postimg.org/94d7pxpl9/2014_04_11_10_57_05.jpg
I checked that the flexible cable with the measurer and the pins are Ok. Do not know if it is possible to break when flexes and creates these lines on copy ... whether to order it cable and PWB...
yes same from dadf and platen glass
this scanner is not same on 245 or 5655 etc....here is ccd and lamp on scan carriage.....
I have problem with copy on xerox workcentre pro 275, half A4 copy is black lines, on print all is ok
i replace scan carriage assy but no help, any suggestion is welcome
...
Hi,
I cant find solution for this problem
Problem is when copy from DADF copy its zoomed , from glass it ok
dadf work fine, i try reset NVM no help
Hi,
How can i switch color scanning options between two xerox 4112 machines ( one have this option the other doesn't )
customer ask me how to print white color on transparent paper on xerox dc252 xD
http://www.precisionroller.com
Hi, on printer oki c830 no have network menu to setup IP, I think that the network menu is disable.
How to enable network interface on C830 ?!?!
i have maintenance utility and can see software...
i replace with new memory----- no help problem is same can someone send me diagnostic tools for reinstall software maybe
Remove the Developer Housing ( REP 9.14).
Remove screws ( Figure 1).
Figure 1. Removing screws
Remove Cover ( Figure 2).
Figure 2. Removing Cover
Carefully dispose of any material...
Use just 1 pack fill develpoer tank with rotating....... if u get problems anymore see number on adc sensor on developer tank that nummber must write in diagnostic for calibation. try find serivice...
Hello, i have a problem with xerox 4112. When i turn it on there is no error, but when i want to print or copy the paper comes to registration and the mashine stops with error 077-313.
i have same problem with Fiery please help me xaldinx@gmail.com
I need software cd's verz 1.1
I have same problem please help me xaldinx@gmail.com
HI,
I have a same problem with canon ir2016j
Message on display "Download Stendby", i have SST, i need firmware files please send me xaldinx@gmail.com
Ty :o
Thanks for your help
I got a new Y, M ROS
maybe i need something else?? to bring my spare in case the issue is not resolved
173641736517366xerox dc 252 light print
Hi
I have problem when printing Full Color Magenta, or red. left side of the paper is faded. For example when i printing 30 pages a pale is going towards...
Hi
I have problem when printing Full Color Magenta, or red. left side of the paper is faded. For example when i printing 30 pages a pale is going towards the center (expands to)
When I stopped...
10-322, 10-324, 10-325, 10-330, 10-370 Fuser Under Temperature
10-330 The initial fuser temperature rise was not achieved within 30 seconds from the start of warm up mode or the standby...
I try it, no help
Try here test page in PDF DepositFiles