I had a Toshiba dp 3580 do exactly this to me. Started out just once, then eventually started to recur until it was almost every copy. Luckily we had a donor machine in the shop, so we replaced...
Type: Posts; User: dbrownlee
I had a Toshiba dp 3580 do exactly this to me. Started out just once, then eventually started to recur until it was almost every copy. Luckily we had a donor machine in the shop, so we replaced...
OK, I went to finish the machine. I did the work with the machine in 1 piece. It took maybe an hour start to finish, including the time spent searching for 2 plastic "Jesus"clips that shot off...
Dickie is correct- have changed many of these over the years. P/N UF6085001 for left, UF6087001 for the right. I usually just changed both at the same time. Pretty cheap parts.
Just checked- Toshiba is pretty proud of that part, so it'd better have the glass.
I've never seen one of these, so I may be out in left field but it looks to me that it would be included in part # ST45484602, Flatbed(maintenance kit_TTEC). #8 on page 17-FRAME-ASSY-FB. Again, you...
OK, thanks for the advice. Parts should be here Monday. Just for giggles I'm gonna try it first without moving anything. It's on a factory floor so I actually don't think I'll have any trouble...
Have to replace feed rollers for the first time on this machine. I see the service manual says that to get to the lower tray rollers you have to separate the machine from the lower tray. Is this...
I don't think that the warranty is voided unless the non-oem toner actually causes a problem. That's my understanding, anyway. But I've been wrong before.
This is correct. Machine error 32 is an inkjet service code that deals with the travel of the print head due to various problems- debris, improper maintenance unit operation, etc.
Good luck, Dave
Double check that model #. I don't see that one anywhere.
I'm pretty sure that it doesn't come up on the site because it hasn't been ordered from them before. Once you order one it will probably show up. I would give them a call. Good luck.
Dave
Precision Roller - Printer Toner Cartridges, Parts and Supplies, Office Supplies, Electronics and Tools Don't have that p/n in their system but they can normally get just about any part.
Would that be a Sam4S ER-650?
This is the closest I could come. Hope it helps. I'll also attach the literature. Let me know if and when you get them then I'll pull them down.
Good luck, Dave.
Which madel are you working on? I can maybe help.
Dave
Does James Brady count? Not an entertainer, but a relatively famous person...
Yep, we had the same problem with him. Sent him a check, it was cashed, and that was all she wrote. Never get replies to pm's or emails. Last we heard was he would check with office after we...
Stockman, any luck with that check?
All my stuff is running great. Will you please answer my emails or pm's.
One more try. Just keeping it at the top.
Hoping someone has a new feed clutch left for a 1340/50/60/70 model. P/N 4402846190 or the old # is 4402858980. New only please, these things are flaky enough not to want to use a used one.
...
Hoping someone still has P/N 12079584- it is the plastic spring latch for the top cover on these machines- released by pushing the button on the side. If someone has one new or used please let me...
Try 6LA98336000. That's the latest I have. Same pad as DP 80/85f. Hope that helps.
Dave
Well this thread has taken off pretty well! I'm going to concede to the greater pork product experts on the differences between ham and ham-like products. I do agree about the different textures,...
Harleyrider- my wife and I ate Chicago style deep dish till it was coming out our ears when I took her there during various copier schools. In fact our anniversary is this weekend and we were trying...