Search:

Type: Posts; User: dbrownlee

Page 1 of 9 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    24
    Views
    3,102

    Re: Copy Quality ... if you can call it that.

    I had a Toshiba dp 3580 do exactly this to me. Started out just once, then eventually started to recur until it was almost every copy. Luckily we had a donor machine in the shop, so we replaced...
  2. Replies
    7
    Views
    1,320

    Re: CS 2050 Feed Roller replacement

    OK, I went to finish the machine. I did the work with the machine in 1 piece. It took maybe an hour start to finish, including the time spent searching for 2 plastic "Jesus"clips that shot off...
  3. Replies
    2
    Views
    1,325

    Re: Brother MFC-1750

    Dickie is correct- have changed many of these over the years. P/N UF6085001 for left, UF6087001 for the right. I usually just changed both at the same time. Pretty cheap parts.
  4. Replies
    3
    Views
    829

    [Misc] Re: Scanner glass part # for REAL?

    Just checked- Toshiba is pretty proud of that part, so it'd better have the glass.
  5. Replies
    3
    Views
    829

    [Misc] Re: Scanner glass part # for REAL?

    I've never seen one of these, so I may be out in left field but it looks to me that it would be included in part # ST45484602, Flatbed(maintenance kit_TTEC). #8 on page 17-FRAME-ASSY-FB. Again, you...
  6. Replies
    7
    Views
    1,320

    Re: CS 2050 Feed Roller replacement

    OK, thanks for the advice. Parts should be here Monday. Just for giggles I'm gonna try it first without moving anything. It's on a factory floor so I actually don't think I'll have any trouble...
  7. Replies
    7
    Views
    1,320

    CS 2050 Feed Roller replacement

    Have to replace feed rollers for the first time on this machine. I see the service manual says that to get to the lower tray rollers you have to separate the machine from the lower tray. Is this...
  8. Replies
    5
    Views
    900

    Re: Reset message

    I don't think that the warranty is voided unless the non-oem toner actually causes a problem. That's my understanding, anyway. But I've been wrong before.
  9. Re: brother mfc8440 maintenance needed print unable #32

    This is correct. Machine error 32 is an inkjet service code that deals with the travel of the print head due to various problems- debris, improper maintenance unit operation, etc.

    Good luck, Dave
  10. Replies
    4
    Views
    1,460

    Re: brother general maimtanance

    Double check that model #. I don't see that one anywhere.
  11. Replies
    10
    Views
    2,851

    Re: Parts source for Konica Minolta

    I'm pretty sure that it doesn't come up on the site because it hasn't been ordered from them before. Once you order one it will probably show up. I would give them a call. Good luck.
    Dave
  12. Replies
    10
    Views
    2,851

    Re: Parts source for Konica Minolta

    Precision Roller - Printer Toner Cartridges, Parts and Supplies, Office Supplies, Electronics and Tools Don't have that p/n in their system but they can normally get just about any part.
  13. Replies
    13
    Views
    4,937

    Re: 3rd Party Work

    Would that be a Sam4S ER-650?
  14. Replies
    4
    Views
    1,975

    Re: SAM4S Cash Register

    This is the closest I could come. Hope it helps. I'll also attach the literature. Let me know if and when you get them then I'll pull them down.
    Good luck, Dave.
  15. Replies
    4
    Views
    1,975

    Re: SAM4S Cash Register

    Which madel are you working on? I can maybe help.
    Dave
  16. Replies
    9
    Views
    1,163

    [People] Re: Lauren Bacall

    Does James Brady count? Not an entertainer, but a relatively famous person...
  17. Re: Be careful of some Technicians here on this forum. They will take your money

    Yep, we had the same problem with him. Sent him a check, it was cashed, and that was all she wrote. Never get replies to pm's or emails. Last we heard was he would check with office after we...
  18. Re: Toshiba e-studio 2820c time for periodic maintenance

    Stockman, any luck with that check?
  19. Replies
    3
    Views
    507

    Re: Whats going on guys

    All my stuff is running great. Will you please answer my emails or pm's.
  20. Replies
    3
    Views
    920

    Re: Toshiba 1370 part needed!

    One more try. Just keeping it at the top.
  21. Replies
    3
    Views
    920

    Toshiba 1370 part needed!

    Hoping someone has a new feed clutch left for a 1340/50/60/70 model. P/N 4402846190 or the old # is 4402858980. New only please, these things are flaky enough not to want to use a used one.
    ...
  22. Replies
    0
    Views
    506

    [Wanted] Toshiba dp 80/85f part needed

    Hoping someone still has P/N 12079584- it is the plastic spring latch for the top cover on these machines- released by pushing the button on the side. If someone has one new or used please let me...
  23. Replies
    2
    Views
    914

    Re: eS170F spare part new part number

    Try 6LA98336000. That's the latest I have. Same pad as DP 80/85f. Hope that helps.
    Dave
  24. Replies
    60
    Views
    34,077

    [WTF] Re: Pizza toppings

    Well this thread has taken off pretty well! I'm going to concede to the greater pork product experts on the differences between ham and ham-like products. I do agree about the different textures,...
  25. Replies
    60
    Views
    34,077

    [WTF] Re: Pizza toppings

    Harleyrider- my wife and I ate Chicago style deep dish till it was coming out our ears when I took her there during various copier schools. In fact our anniversary is this weekend and we were trying...
Results 1 to 25 of 201
Page 1 of 9 1 2 3 4