Search:

what have you done to the machine so far?

if you take the drums out for the respective color. Look at the developer, does it look black or does it look yellow and cyan on the developer unit.
...

G4printing, my experience with the machines and dusting (any color) is what Xcopytech said. The specific color is overtoning due to not having enough developer in the developer unit.

2 solutions...

this happened before I did the ram clear.

Also, I have another threat after this one regarding doing a dc-con clear that messed up some other settings.

I also did run the routine you mentioned,...

I just ran the Sens-Adj->OP-Sens and everything is good except for the OP-PS sensor

Also, when running CL-ADJ. This adjustment would fail.

Thanks

The LCT Deck doesn't show in the COPIER > OPTION > ACCPSD-D > ACC1 to ACC8 list, it only shows that we have the finisher installed.

Should it be on the list? although it does show up on the...

Sorry, I didn't specify which paper deck, it's the LCT tray (tray 5)

All other settings are correct, machine shows that I have LTR size loaded in the tray. But when I load the paper in the tray...

Hi, I have a Canon iR7105 paper deck that was working fine, but it would not sense that there are paper in the tray.

The tray lifts up and stops appropriately when it reaches the top, but the UI...

Hi, I have worked on 5 different of these models, and haven't figured out what is causing this problem.

But it seems that all of these canon iR7105 machine's universal trays seem to have the same...

You are right, it was the plugs in the connector inside the HCF tray.

My tech had someone pulled some of them off when he was fixing the machine previously

It doesn't show any error.

One thing though was that the machine had the main motor clutch fail and I replaced that.

I don't know if when my tech replaced it that he knocked something loose.
...

Hi, I have a Docucolor 260 that has a HCF tray that's attached the to machine.

Recently customer called me saying the Bypass isn't working.

The problem I'm having is when I remove the HCF and...

Yes I've checked that.

I've used both methods to enter emails into the address book.

It works sometimes and sometimes it doesn't work.

Hi, I'm having an issue with setting this machine up to scan to email at a customer's office.

Here's my problem.

Initial setup
1. Setup scan to email works using the address book to email...

Have you tried replacing the entire Developing Unit for the offending color?

I've had machines where I had to clean the ROS every month where the machine is running 40,000 copies per month, but...

I can rule out LDAP issue, because the machines aren't even set up for that.

They are both using internal public address books.

I found a software update with version 21.120.60.0015. But the...

On the machine with the internal rip. That one has the latest 25.54.53 firmware

On the one with the external rip. They both had 21.113.02 and 21.120.52

Neither of them was from a clean HDD,...

Hi, I have a Xerox Workcentre 5638 (internal controller) and a Workcentre 5655 (external controller) in the same office.

I set both of this machines up to scan to email. Everything works fine...

ok so that is the one that uses the 54.xx software.

This raises another questions I'm having too.

I have 2 machines. one has the 21.120.xx software and the other with the built in controller,...

I'm not sure how I can check for that.

So I take it that the one w/o mod tag 40 in it can only use 21.113 firmware?

Sorry, I don't have the part number. I was provided by my boss but didn't come with the box it came it.

That's if the ESS already have version 21.120 on it right?

I only have a CD with netboot for version 21.113, and with I use altboot to put 21.113 it won't install.

Maybe I'm doing it wrong,...

I can only use this only if I have a working controller.

I'm installing this on a controller with a new HDD so I would need the netboot CD to do a fresh install VIA altboot

I'm looking for the newer system software with altboot for the Xerox Workcentre 5638-5687 series copier.

I have a ESS with version 21.120 firmware but only the CD for version 21.113 software.
...

You can ask a xerox repair/dealer company in your area to see if they can find you one.

Also, that bearing falling out of position is a very common problem on this machine, hence Xerox made a...