Search:

I had such a difficult time taking it out. Is it supposed to come out from the top or bottom? There is practically no room to wiggle it out of the bottom. Every time I do it, I'm afraid to brake it.

Really? How can I "test" the drum for failure? Also, should the belt be a bit loose on the assembly of be tight? should you be able to move it by hand?

Yeah, just figured out the code. I was not looking at the right place in my service manual.

What does this code refer to in itb assembly?

I know people would not resist commenting on the...

After dis-assembly and cleaning the copier threw out a code in the first 2 minutes of warm up. E000070-0001. The code deals with fuser. It does not reach correct operating temperature. Please correct...

Thank you. You are correct. I was not looking a the right place in the book to identify the code.

The fixing unit was replaced 6 months ago. How do you reset the code in the service mode?

Thanks

Well, after the removal of the itb assembly, I found the issue. The spring that holds the arm of the roller was loose. Arms are not broken. Mine are though... What do you do with those gears? They...

Thanks for your help. Is there an easier way to access the screw by the drive gear? It seems that the delivery tray has to come out.

What is the procedure for removing transfer belt assembly? My Service manual does not address that in detail. Here is what is done so far - Top section: Removed cleaning blade from the top section,...

Do you have a part no? I can look it up in my parts manual.

Can someone tell me what might be causing this? Top of the image is normal and the bottom is very light. Please see the attached images.

Thank you

1385613857

Mostly real estate. I buy, remodel and rent out. Commercial printing and graphic design. Mainly wide format advertisements.

Thank you so much for this information. I am in PA, Scranton Area. The closest tech from me is 35 miles away. I already took the fuser assembly out and replaced the internal guide delivery. The part...

It is c3170i

Machine was manufactured in 2005 and was sitting inactive since 2007.

Thank you

Ok. I am glad to hear that through a process of elimination and some hard thinking you where able to figure out that I am not a tech. This canon copier was given to me by a company that went out of...

parts of the rollers look like wrinkled skin. is it normal?

What makes you think it is not? Are YOU a tech?

Here is another one...

10837

Sorry for the low res picture here is one scanned at 300 dpi. The machine is c3170i.
10835

Please see the picture. The lines are also on black and white copies. Do the fuser rollers need to be relaced? Or could it be something else? Could the rollers be cleaned? Thank you

PS: There is...

Actually the last three numbers changed from 000 to 010 to 030. The new number is FL2-0167-030

Just would like to thank zoraldinho and teckat for giving a useful information about this problem. I was able to find the part and order it. Less than $30 including shipping. I raise my beer to you...

Is it possible to get this part without the fixing unit?

Well FL2-0167-000 has to be replaced for sure. It actually is broken. And this is where the paper gets jammed. Anyone has this part? please see pics

10768

Can someone sell this part to me?

FL2-0167-000

Part No 62 - FL2-0167-000 is cracked and burned. Does it happen on a regular basis? Any other parts I should be watching out for? Thank you for all your help