My experience is you can clone the hdd on the ira c50xx but not on the ira c52xx but you can use any similar hdd with the same capacity or higher and use sst or usb stick to format and install system...
Type: Posts; User: spectraindo
My experience is you can clone the hdd on the ira c50xx but not on the ira c52xx but you can use any similar hdd with the same capacity or higher and use sst or usb stick to format and install system...
The message : The internal output tray of the main unit is full.
appears usually because the output tray full sensor flag is missing.
Unfortunately you cannot clone the hard drive on the C52xx series, it will report a bad disk.
The only way is get a USB stick with System Software for the machine or use SST with a PC.
IR ADV 400i and IR ADV 500i have the same engine but different speed. Software is the same.
Hi guys, I have a Canon IR ADV 400. The hard disk was bad and need to be replaced.
Where can I download the System Software for IR ADV 400 ?
Can somebody help me ?
The problem is with Windows 10, it disables SMB1 by default so machines cannot send over SMB1.
If you enable it, next time Windows 10 update will kill SMB1 again, it is a real headache.
You can try...
Try using another version of Acrobat Reader.
You are right, the machines throw an error code E074 and alarm codes 300025, 300026, 300027 and 300028.
This is because the solenoid SL01 behind the fixing motor was sticky and causes the ITB not...
Ok thank you guys, tomorrow I will check the machine.
The Cyan toner is merely finished, can this be the cause ?
The Cyan, Magenta and Black Drums are new.
Hello guys, I have a Canon IR Adv C2220l with prints and copies coming out as black and white.
The Auto Colour Selection was set to Auto or Colour, results is still the same, black and white.
Got it, thanks for the information.
I will check the machine.
We have these problems :
1. ETB Displacement.
2. Jam 0112 and 0113
3. Error E017-003, M19 seems not working sometimes.
4. Error E001 when using Folio or Legal paper.
Hi TECKAT, can you send me the 50\60 Canon tech pub ? I have some problems with IRA8105.
My email address is mulyadikj@gmail.com
Thanks a lot.
What kind of Toner did you used ?
Make sure you are using the Toner for IR7085/95/105.
Yes it is the same.
Here are the numbers :
FB3-9246-020 , WIRE, DRIVE, RIGHT
FB3-9247-020 , WIRE, DRIVE, LEFT
I have met this problem before, use the service mode :
SERVICE MODE:
- COPIER> OPTION> BODY> TRNSG-SW (transfer guide bias control mode switchover)
0: switches to +200 V in a high-humidity...
There are two sets of sensors that detect tray position and paper height, S4 for tray B and S5 for tray A.
Clean the sensors and make sensor auto adjustments.
38071
Try tray sensor initial adjustment, see pdf attachment.38030
Hi guys, can you clone iRA6275 hard disks ?
I have tried several programs with no results.
You must have a machine with SEND capabilities like the IR5000i or the newer ir5050i, and save it to a flashdrive.
You can SEND the contents to a computer as PDF files, and PRINT them back to the...
Did the ADF AB1 come with installation kit ?
You must have :1 GLASS READER FL2-9843 and 1 GLASS RETAINER FC8-6178 that usually comes with the kit.
There are no metal parts.
Impossible on these old machines.
Check the Heat Discharge Fan FM3 and the Filters.
The only tool you need is your cheque book ☺