Search:

Type: Posts; User: Mita-Konica-Tech

Page 1 of 4 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    1
    Views
    555

    HP Designjet 815mfp

    I have a client who moved their plotter from one plant to another plant. But before it was moved their IT department formatted the hard drive on the scanner. Of course they do not have the original...
  2. Replies
    3
    Views
    2,565

    Re: HP 4700N

    lift motor has a spring on it and it floats back in forth no problem.... I changed it out anyway just in case, but I still have knocking noise because the tray lift is over driving... changed out...
  3. Replies
    3
    Views
    2,565

    HP 4700N

    HP 4700 over driving cassette two (2).....throwing 60.02.00 codes....

    Replaced the Lift Drive Assy and DC Controller. Fill cassette half way and no problem, any more than 250 sheets it codes...
  4. Replies
    3
    Views
    595

    Re: IR 7086 PM Counts....?

    zoraldinho......Thanks for the info..... I just took on this Cannon account and need to bring their machines up to factory spec.... I'm normally work on Konica and Kyocera (99.9 % of the time) but...
  5. Replies
    3
    Views
    595

    IR 7086 PM Counts....?

    I do not normally work on Cannons nor have i had a chance to get a manual on this model, IR 7086 yet.

    Couple of quick questions on the pm cycles on this model:

    Maintenance Cycle (PM Count)...?...
  6. Replies
    17
    Views
    2,580

    Need access to KM website....

    Is there any body out there (authorized KM dealer) that would transfer my Konica Minolta tech number to their company so I can get back on the web site....lost my access after leaving my last...
  7. Replies
    3
    Views
    1,190

    Re: Production Color Tech

    Turned down one job offer cold... Second offer was with a good company but the money wasn't there considering the location and the third offer is still pending....

    Been doing independent work...
  8. Re: Bizhub C454 FS-534 not aligning paper correctly when stapling

    I agree...... Take it apart .... and fix it.... great opportunity to learn what you will be facing in the future.... and if all else fails open a KM ticket and have your regional KM Service manager...
  9. Replies
    3
    Views
    1,190

    Re: Production Color Tech

    Received three offers....thanks Copytechnet.com Still in decision making process....!
  10. Replies
    3
    Views
    1,190

    Production Color Tech

    Experienced Konica-Minolta and Kyocera-Mita technician with 15+ years of field service. Currently Factory Trained Konica-Minolta Technician: bizhub PRESSC7000/C6000/C70hc, bizhub PRO...
  11. Re: Konica C 6501 with error codes C-4501, C-4502, C-4503 and/or C-4504 error codes

    Just wanted to update this post:

    It's Fixed...:)

    Problem was the Printer Driver Board was causing overdriving lens motor in rear direction, when running the "Write Memory Position" adjustment. ...
  12. Replies
    3
    Views
    1,977

    Re: Scan Settings

    What a great detailed explanation ..... !
  13. Re: Konica C 6501 with error codes C-4501, C-4502, C-4503 and/or C-4504 error codes

    Yes I swapped the drums and eventually replaced all four drums..... Also swapped the yellow and magenta drum drive shafts (motor assay) thinking that the shaft holding the drum may be wrapped, note...
  14. Re: Konica C 6501 with error codes C-4501, C-4502, C-4503 and/or C-4504 error codes

    Nothing under the drum, installed new drums...
  15. Re: Konica C 6501 with error codes C-4501, C-4502, C-4503 and/or C-4504 error codes

    Replaced color Registration Assy - same result yellow skewed.... back to the drawing board...
  16. What are your thoughts on the Vice Presidential Debate

    What are your thoughts on the Vice Presidential Debate

    Biden over did the facial expressions and interruptions when Ryan was speaking...

    To me it looked like an angry old man debating a...
  17. Replies
    4
    Views
    831

    [Jamming] Re: 66xx jams on the C754/654 ADF

    Thanks we appreciate it....
    http://www.zoominto.com/zoomapi/ZoomButt.gif
  18. Re: Konica C 6501 with error codes C-4501, C-4502, C-4503 and/or C-4504 error codes

    One other thing... I have ordered a color reg assay and will replace in morning ... but I sure this will not solve my problem...! My tech rep from KM says I done everything he would have done... ...
  19. Replies
    2
    Views
    853

    [Jamming] Re: C6501 jamming from bypass tray

    Are you setting the paper setting for the by-pass tray....what is the weight of paper ..... type of paper .... and the error jam code ...?
  20. Re: Bizhub C35 - Jamming from tray 2 only

    It seems every time I work on one of these toys, I always get a call back...after installing new feed rollers....for jamming.... ??? were are you putting these shims ??? mmru4real ????
  21. Replies
    20
    Views
    11,246

    Re: bizhub c360 scanning question

    I use the gmail account all the time and I never have any problems with Google...go figure...
  22. Konica C 6501 with error codes C-4501, C-4502, C-4503 and/or C-4504 error codes

    well I'm stumped on this one....
    I responded to a tech assist call on a KM C6501 that was down due to C-4520 at boot up... the machine had been down for a week with multiple issues. Now it's my...
  23. Replies
    69
    Views
    6,516

    Re: Impressions from Presidential Debate

    DITTO
  24. Replies
    4
    Views
    831

    [Jamming] Re: 66xx jams on the C754/654 ADF

    Can you post some pictures....of your fix...... Thanks in advance
  25. Replies
    12
    Views
    3,535

    Re: C-6501 warming up problem

    Spock made the right call on this....also check to make sure your dip switch's are set properly....
Results 1 to 25 of 76
Page 1 of 4 1 2 3 4