Whats your email address and i can send it over.
Type: Posts; User: Lasersupplies
Whats your email address and i can send it over.
I would not be overly pushing Toshiba for turnarount times. We have an order of 40 devices that was placed back in May, have not receieved any to date! We now are on the cusp of losing these...
Login to TopAccess using a web browser and the device ip address. The username and password should be admin & 123456
Select user Management > Department Management > New then set your quotas from...
we have tried all of the solutions above with no joy, have swapped the stapler unit also and still the same. will happen intermittently roughly every 7/8 booklets which makes it harder to pinpoint...
Recently a few of our clients have been getting this issue when printing out booklets. I have tried HP's fix with no success.
"1. Make sure that the finisher is properly grounded. 2. Ensure that...
Hi,
I am a supplier of Toshiba tec devices and have come into an ongoing issue with an install. In my clients building they are running two separate newtorks. 1 for ipads and wireless devices...
Thanks for this, was on my second dk. Setting the u100 DC to off cleared the backround straight away. Is it ok to leave this setting at off long term?
When printing on several machines I have encountered a thick black smudged area that only shows on the back of the page regardless if i have sent a duplex job or not. This issue has happened in the...
I am looking to employ a sales rep in the UK area and I'm wondering what the best option is to pay their wage:
Commission only/commission plus wage etc and also what is the going rate? I have...
Quick one, is there an option to view and print stored jobs on the homescreen of the hp enterprise flow models? If not is there an embedded software that can be added so this can be done? My reason...
Hi There, I have several M880s that won't automatically pick up the paper size when scanned from the glass and the paper size will have to be selected. When scanning from the ADF there are no issues...
Has anyone else encountered this? still havent gotten to the bottom of it. Could randomly happen whether it is connected to a network or not. will clear for a day or 2 and randomly appear again....
Hi Have never had this error before and within the last week i have had two of these materialise on two different clients HP M880s.
I am struggling to find any information in regards to this error...
We have had these problems in the past with diffrent HP models.
i would try the autosense settings first.
Adjust paper types - plain - print mode, (extra light mode)
Also, serperation mode...
Good evening all,
I'm wondering how low your pricing can go to make profit on a cost per copy. Trying to compete against a few of the big players. How low can their cost per copies go to make...
edited just to clear things up, thanks
Yes I have cleaned the path, Happens on both single sided and duplex. happens randomly too wouldn't be every page.
Have a weird issue that has recently been showing up on a lot of clients machines. When printing the front of the page is clear but on the back there is a thick black smudge on the left hand side of...
I have a right few of these models out in the field and they are on the verge of losing me clients. I have got over alot of the issues but the ADF copy speed is killing me. The first page out of...
A resistor under the back cover resets the fuser assembly. I have seen this fuser run a few times, eventually the sleeve or pressure roller goes but you will get another run. As for the ITB, these...
This is corrct Lance, these rollers dont seem to be listed anywhere but they are changeabe as i have swapped from one assembly to another to make sure this was my issue.
Regards
Hi,
I have a few of the M880s in the field that fail on the quoted part(duplex feed assembly). I can purchase this assembly for around £140-£150.
My issue is that the assembly is fine but the...
Thanks very much for your help guys, got sorted with the 6.6.5 and set accounting to enabled under device settings. :D
Thanks for the prompt reply and drivers link. Unfortunately the one i require is not there. HPs website states
Install and setup the Universal Print Driver v6.6.1 for printing with Server-less...
Good day all,
I was wondering if anyone was able to provide the HP UPD v6.6.1 that allows for "access code only" printing?
Thanks