As stated clean the under side of the glass and clean the size sensors. Common problem with these machines
Type: Posts; User: copierguru
As stated clean the under side of the glass and clean the size sensors. Common problem with these machines
My guess is corrupt hdd. Try formatting it or unsetting it
Had this issue before. I was the hdd. Disconnect and see if it control panel comes back.
Check the bushings on the reg unit. They get all bound up from toner residue & and oval out over time. Either clean or replace if ovaled. It will cause noise and jamming.
Disconnect the hd and see if it will boot up. Could be bad. And like mentioned reflash fw dimm memory could be no good.
Sorry must have misunderstood what you where saying. Obliously ou would eat to use DMV or email first. FTP is junk know one uses it. And also with user. Ix you can have individual folders with...
Had this issue once. Drive me nuts for almost 2 days. Check the toner supply solenoid. They stuck sometimes and this will cause the c2557 and 255c codes. Also you will probably need to replace your...
I re-build these all the time 423/250. I've found the oem fusers are all over the place in yields. I've got some that last usually 100 - 150K and I've had some go almost 300K. I just replace the ufr...
That's correct. User box is unavailable without hd
Just had the same exact problem earlier this week. Last week got a call for a 2557 which I thought was odd seeing the drum & dv only had 25k on it but I replaced both again code went away. Monday...
Nevermind I found it. I had 3350 typed in before. Sorry about that
I woulnt be asking if I found it on google. Went thru 5 pages and nothing for this finisher
Would anyone have a parts manual for an sr-3050 finisher product code D372. thank you
i was wondering if anyone could help me out. i am in need of the b296/b297 lateset firmware (System,Engine,Scanner) thank you.
have a ricoh mp-5500 that we just added the sr-4000 booklet finisher to. the problem is the folding is inverting backwards. cannot figure this out. anyone seen this before? also if i reverse the...
have a ricoh mp-4000B with the print /scan option installed. customer wants color scan, i see no option for this as the 4000/5000 does. what need to be done to make this color scan or is it possible....
customer has a ricoh mpc-4500 with postscript 3 installed, when printing say a 30 page documnet, the first 20 pages come out fine, then the reaminder comes out with a slow output, about a page per...
i use hot water in a big tote bin with a mixure of purple power and kork rub. panels look brand new.
not the same , consumables are different
press utility /counter
press detail below copy count
stop-0-stop-01
never had this code before but this is what it means, hope it helps
code means:
asic10 timeout number of DMA under operation and transfer completion line 0 DMA_BO
MFP control board...
i had a call a few weeks ago konica 7075 with just about 30 mil on it and still running
this error code is a hard initialization abnormality, turn machine off and on,, still there re-initialize the hhd. still there you probally have a bad hdd (replace).
check the toner motor, trick the door without the tnoer in it and see if it is spinning.