Hello ,
yes this model the weak point on it the fuser film life is not high, you can use the for use quality but it will make around 30k max , same as ir2545 .
also as i read the series 4535 fuser...
Type: Posts; User: mramlawi
Hello ,
yes this model the weak point on it the fuser film life is not high, you can use the for use quality but it will make around 30k max , same as ir2545 .
also as i read the series 4535 fuser...
Will be thankful if some one can share it to us
seems its hv problem or itb problem have u try a new transfer belt and is this problem happen suddenly or after you change toner is ur toner original
Hi there,
i install new copier Canon 2930i ,just tried to know how can i enter the service mode i tried home and the 2 8 but didnt work will be thankful if some one can share me the steps and the...
Thanks for ur comments and kindly note that its still sellin and our country we have lots of it
thanks , my problem solved after i replace a new Main control board with same version ,cos as I understand that theres some models with serial numbers can work on each other and others not
Its a Fuser problem,u can clean the fuser film then use the grease to let it roll normally should works
Hello for all ,
faced a problem in canon ir2520 white power bottom gave e197
after we changed power supply-laser-dc board and hv pcb”s it didn’t work until i changed the main board the code gone...
Hi all ,
wonder if theres a soultion for these kinds of printers when the client didnt use it some times blk color didnt appear or color , watched many youtubes dissembling the machine to blow in...
Is the jam code 107 .feed us with the jam code plz
It includes two firmware 1 for dc and 2nd for main v0705 version,same way installing for canon ir2520/30/35/45 series setup and it will finish
i dont think so it can work
As i heard that theres update firmware for this series to read the toners without chip ,cos of shortage of chips can anyone help us to get it 😬
Already pushed the door and nothing change that made me really crazy
yes sure i remove all the laser and clean the polygon motor nothing change
I already clean the laser and still the same
as i uploaded the photos to check how it start in a good density from side and how it comes lights on another side
Dears ,
its a weird problem, on this machine it make a gradians color start normal from the and start to get lighter on the other side using a4 plain paper also think a4/a3.
by the way the cmyk...
no still the same i stopped workin on it now i will work to solve it latter
yea i know that sensors also theres 2nd sensor for duplex , i will try to add extra wrap. Thanks
I wonder from this problem in this series of canon , the machine working fine and suddenly after wokring above 50 page the machine start to jam . Jam cause 000107 , problem in one side happened and...
So they are different and didnt work on each other
Dear,
i will be thankful if any one agree me about the pick up unit for 1st and 2nd cast for this series are different thank the 3rd and 4th darwer , cos i tried to put the 3rd pick up unit in the...
Ernesto my friend contact me tried to msg u but seems no space in your storage mail