Sounds like your belt cleaning isn't up to par. Take it out and empty it (vacuum it good), preferably replace the blade.
The C-4520 is a color registration error, sounds about right if you're...
Type: Posts; User: Avskrap
Sounds like your belt cleaning isn't up to par. Take it out and empty it (vacuum it good), preferably replace the blade.
The C-4520 is a color registration error, sounds about right if you're...
Have you checked the sensor flag (P/N 65AA51311) after the fuser going into the ADU? It gets worn, should be rounded but gets pointy with time, especially if the customer is running alot of heavy...
Any possibility of a scanned sample?
Do you have the newest version of the belt (with the auxiliary cleaner and without the tension springs)?
If so, have you checked the auxiliary cleaner?
Any...
That's how all the KMs work.
It's to protect the machine, according to KM. Haven't really had anyone tell me exactly why, more like "It is how it is".
Is the customer running heavier stock? On normal settings? Or some kind of different kind of paper?
Ah, a failed HDD. Quite common, just didn't think of it. Haven't had any problem loading FW if the HDD's been busted.
You're correct, all the functions are there still but they're limited, i.e....
I'd say it's time to start swapping boards.
If you could see the error codes, I'd wager you have CA05x (1, 2 or 3).
Swap the MFPB (A1UDH02102), try loading FW (G00-D6).
(I know this, because I was browsing the infohub earlier today looking for the movie data for a bizhub 283)
There's a firmware that solves this issue. The solution is included in the latest mass...
Replace the transfer roller.
If it says a door is open when you've removed the finisher, you haven't removed the vertical transport. It's enough just to disconnect the contact from the rear and hold the vertical transport open...
Is it a PS job from some Linux dist?
We've got an ongoing project with the department of computer science at one of the local institutions for higher learning where they've got a C220 that freezes...
The PRCB will work straight from the other one. The NVRAM is located on the MFPB (left board), the PRCB (right board) will require no special procedure.
Although, updating firmware is always...
This, and many other weird "features", are common these days. I've got multiple customers experiencing problems with Office 2010 and our printers. Konica Minolta blames Microsoft, Microsoft can't...
Why I asked about the CF023 is that we had a machine yesterday that wouldn't do jack shit. It started up normally, warming up and doing adjustments, but then just locked up. You couldn't access the...
Do a Data Clear and a System Error Clear under Initialization in SM. This has freed some locked up machines for me in the past.
If you check the error logs, do you see any CF023?
A C8000 is a Konica Minolta production machine, not a stinkin' Canon!
Avskrap, out!
To uninstall the LK-105 you have to go to Infohub, get a deactivation license and enter it into the machine. This is detailed in the service manual, but that's the rough explanation.
I just solved this on a C364. I cleaned the vertical transport rollers and the one-way clutches next to the rollers. The transport rollers took a while to clean, they were really dirty with some...
We've always loaded the latest mass production program. Solution and Special FW is used when needed, but for a bog standard update I think it's best to use the mass production FWs.
I had this but on a C550, no jam code displayed though. Had a KM 3rd line guy with me on two visits, we swapped everything in the machine. Boards, ribbon cables, rollers, gears, motors... But it was...
A C500 isn't "old", it's old.
I'll shut up now.
I've got rougly 70 miles to the office, with the last 15 sitting in bumper-to-bumper traffic moving at a snails pace. On a good day it takes me an hour but I've had days where it takes upwards of...
Since the machine is fitted with a Fiery (external print controller), you don't set the network settings in the machine itself but on the Fiery controller. You do this by going to Controller Settings...
As stated; What you cut out was a plastic wrapping that should be there, albeit not torn or wrinkled. What Flash said about the unit life indication is correct, everything is "new" except the fuser....
Resetting of the counters? Sounds like an NVRAM failure.
I've never liked these boxes...