Japan.Korea and China offer them, I tested,but yield is lower than OEM, besides cause preamature damage on drum surface.
Type: Posts; User: technic
Japan.Korea and China offer them, I tested,but yield is lower than OEM, besides cause preamature damage on drum surface.
It should be nice if you give me the option to start a link to the site when the PC boots. If there is a tool for it, pls.let me know.
Adeyemi,
Is it a Xerox brand machine imperia and pinhurst? if so, what´s the model?
I am in a hurry to down the cost, toner for Dc250 is going higher every month.!!!
Thanks.
Try in Ebay. I have found some goods suppliers there. Supplies are OEM.
I appreciate your kindly help for the info.
Regards.
:confused:If anyone can help me, I would like to know if 8850 and 510 printers share the same arquitecture with 8830, I have worked on 8830, now I have the chance to buy the 510, but first I would...
Take care about the type of oil you are using, once I tried to use Xerox oil used for wide format, the toner stucked on rollers and donor after 5000 prints, then the rollers got damage.
There is no way to do it, you need the Fiery.
The btac sensor is mounted on the developer unit,so you need to get the developer unit out of the machine to have access to it, this sensor faces the xerographic module and read the patches on the...
If the oil pump is working correctly, you must change the Oil system enhancement kit (604K8100), the kit includes : the metering blade, pick up and donor rolls.
Try the paper tray aligment using the command workstation?, is is located in the server options.
Thanks techmate, I will check it out.
Did you try 11111 within the tool button?
or entering diagnostic, press and hold 0+start
password 6789
touch NVM initialize icon
touch All icon
Hello,
I would like to contact somebody in Turkey. I need to verify if a company that sells devices for resetting chips has background there. I will appreciate any help.
welcome to the club!!!! these xero modules are causing many xerographic problems (low patch, many seams detected, arc faults, etc), no matter where you buy them (even Xerox), most of them are...
try this
www.chipreseting.com/xeroxcopiersresetter.asp
Hello Everybody!!!
Does anybody know where I can get OEM toner cartridges for DC250, less than U$90.00 FOB price?
I will appreciate any clue.
Thanks in advance.
Thanks a lot Xcopytech.
Actually that is the same question I have. The architecture for the Xerographic subsystem is the same for Dc250 and 5000, but I have been told that the 5000 uses oil in the fuser. The next week I...
Thanks, I will check it out...
Do you still have the problem?
Thanks xcopytech,
I also replaced the contact roll (59K08160), Bias roll (59K07800)and the back up roll (59K07812), cleaned the metal plate that touch the contact roll, the CMYK image is better...
Prints have some white spots with a black spot in the center which appear ramdomly, but not in all prints. It seems that some developer grains are falling from the developers units. I have already...
Check if the problem is happening just with letter size ,normal or heavyweight paper, if the machine works fine with 11x17 inches sheet, clean both sides of the belts to avoid this one slips during...
can you attach any sample?