Search:

There are a lot more steps than 3 , you need the machine install guide to set it up.Date , time , serial number , full gradation , there is no alternative , contact Paul who subscribes to this site ,...

You will need to do a complete setup as if the machine is new out of the box . Follow all the steps and dont miss out anything , if you are not a tech then now is the time to call one .

You could do a lot worse than the Konica Minolta range . Great machines , feature packed and will do all you require and more.

Im sure Paul who sells manuals on this site could help .

It is almost certain to be the black developer drive clutch , have had to change a few , there is a technical bulletin on this

Try Paul at manualsforyou , he usually has firmware for download

As a new member you certainly know how not to get what you want on this site. Everyone here is willing to help genuine people with problems but to just demand for free is not the way to do it . Paul...

As a Konica Minolta trained tech , the C6500 is a good machine if the customer is running as intended to be run . Put 40 to 50k a month color and fine , but leave it standing for a week and you will...

Call a qualified tech .

Bit dangerous posting full details of tech rep mode to an end user on an open forum .

There is special firmware for this model to switch off drum and dev counts same as C360 , these units will do 200k+ copies without needing drum and dev replaced and without copy quality issues.

You need to change the developer and dont forget to F8 when you do , this sets the toner level based on the new developer . This should sort your problems .

After 38 years in this business , I am still learning . You are never too old to take advice from others . Welcome to the Forum and good luck in your job . I am a konica minolta tech working for a...

Paper behind the cassettes , remove tray ,clear paper , power off then back on , problem solved.

You are in serious danger of totally screwing up your fuser rollers by trying to fool the machine and run heavier stock than recommended . The manufacturer recommends specific weights so the machine...

Looks like a power issue , had a similar problem on a C360 , same time in the morning 3 weeks in a row. Turned out the power company were doing work on a transformer at that particular time and...

Utility key-user-copier and the third box down change to current. Set the machine to black before you do this.

We do the firmware and soft switches on all our machines , they will run way past life , have had some run more than double without any deterioration in copy quality .

I agree with previous posts . You either have it set up incorrectly in the driver or user authentication or account track is on and you havent entered the user details in the driver . If the light is...

This is something you do NOT want to do if you are not a certified tech . You will need to do a complete setup of the machine after you do nvram recovery . You need to call a qualified tech otherwise...

You ask for advice but wont take it when its given , you will end up replacing fuser , but go ahead and spend lots of time trying to repair the old one .

You should be able to get it to print using using the vista or xp driver . You can download it from the konicaminolta website under support .

You may need to change the ip address to a different address . I had a C552 doing this and there was a job being continuously sent on their network from a linux box that was locking the machine ....

Read the previous post , you either need to rechip unit or replace it.

You need to call a qualified tech , no one will send you firmware , people ask all the time here for firmware . If you are a certified tech you know where to get this.