Make sure you run the AC Calibration once you replace these. I've had that solve this problem before. Otherwise it's a bad DV unit.
Type: Posts; User: ES-OGT
Make sure you run the AC Calibration once you replace these. I've had that solve this problem before. Otherwise it's a bad DV unit.
I'm pretty sure I've seen this before only I think it was an FS-1135. I ended up going for the scanner like you did. In the process of taking the machine apart, I noticed the ribbon cable that runs...
Yes, it is the same identical sound and yes they are using OEM cartridges.
If by other toner cartridges you mean the other colors, we thought about that but since it seemed to be centered around...
We have two customers, both with a HP M551 that is getting an odd squealing noise from the upper left part of the machine. When you go in and run the individual motors, the noise never comes up. ...
I've seen that before with feed problems from the paper tray but never after the paper leaves the fuser. Does that solenoid effect the exit also?
We have a C10 that is jamming as it tries to pass through the exit rollers. The fusing had also gone bad so I replaced the fuser. Tested several times with zero problems. I let it set for an hour....
Just in case anyone ever has this problem, try replacing the interlock switch for the front door. That was the whole problem.
Good point. Whatever your problem is it's definitely fusing related.
I'd have the tech let the customer run the machine and stay there for an hour. My money says the customer is doing something different and not telling you.
A couple of ideas here:
1) Try different brand paper. It could be the paper can't handle that much toner and the fuser is smearing it.
2) Big and Bold may not work well for that model. I've...
This one has several of us baffled. We have a TA-520i that is getting a C4100 error. I'm just going to list everything we tried.
1) Reseating connectors
2) Replacing LSU
3) Replacing Drum (we...
Sorry for taking so long to get back with ya'll.
I did call into Kyocera and they tried their fix with no luck. I swapped out the transfer belt and so far no more problems. In fact once I...
We have a customer with a FS-C5250 that is getting the registration issue reported in the QA's. We've tried the firmware but it doesn't seem to be working. I'm a bit stumped at what could be...
Thanks Blackcat!! I still haven't found the problem but I'm getting close. Your post should help.
Northernlife = I went ahead and replaced those two parts and things got better but now it won't...
I haven't had this problem on that model yet, but any TaskAlfa that I've gotten an F000 on has always been a bad HDD.
The gear actually looks like it's in good shape. I'm not seeing any teeth missing. In this case are the teeth always missing or is there a chance of them being worn down?
Well I'm glad I talked my service manager into letting me bring that machine into a shop and getting the customer a loaner. That one may drive me to drinking again. I'll check that gear and let you...
I've got an IR2200 that seems to be overdriving. Basically it starts lifting as normal, reaches the top, then clicks back down and continues driving back up. It does that several times until the...
The CIS is a lamp/led inside the double-sided doc feed that you can get with these machines. It's fairly easy to replace. CCD is the main camera taking the picture.
Has anyone seen a problem where the doc feed (specifically the DP-770) on the new TASKalfa's won't lift? It doesn't cause an error code or jam it just says to reseat the paper. My hunch is the...
I've seen this before and if I remember correctly it actually had to do with specific documents and the emulation. I think if you change the emulation to PCL it works (or visa versa I can't remember...
Make sure they aren't using generic toner.
What OS are you trying to scan to? Win 7 and 2008 tend to be a bit tricky.
I've got a customer that does a lot of printing from their MP tray. More specifically they put a cover page in the MP tray and print the rest of a packet from the regular trays. When they print...
Had this problem on one of my customer's machines and it turned out that it needed the extra memory stick.